Measurement Requests

9 Replies, 3421 Views

Would anybody have the TOMY Ffarquhar Station, TOMY Lorry 1, Plarail Container Cars and Containers, TOMY Knapford Station, The Barrel Cargo, The Fruit Cargo, The Fish Cargo, The Tree Cargo, and Oil Drum Cargo? I need measurements of them in centimeters for recreation purposes.

(also with Knapford I need measurements and references of the stop/go mechanism)
name's roxaclock, see ya around!
[-] The following 2 users Like FfarquharDeveloper's post:
  • generic_truck_69420, Super
I can measure all those for you, in the fullness of time. There might be several different barrel and oil-drum cargoes.
[-] The following 2 users Like chrisjo's post:
  • generic_truck_69420, Super
Thank you Dr Chris

Ffar...planning on 3D printing???
[Image: 2108-02aa.jpg]
Plarail 2-container flatbed:
Overall length of chassis 110mm, width 40mm, width including axle boxes 41mm.
Raised area that the containers fit over, length 106.5mm, width 36.5mm, height 4mm.

Plarail container:
Length 53mm, width 41mm, height to roof 32mm, height including lugs on roof 34mm, depth of cut-out along bottoms of sides and ends 4mm.

[Image: T-0407-05.jpg]
LOR-1:
Length 86mm to tip of nose, width at mudguards 36mm, height from road 41mm.

All measurements to nearest 0.5mm.
[-] The following 3 users Like chrisjo's post:
  • generic_truck_69420, Mister No, Super
Thank you for the help Dr Chris Smile
Fish and Fruit Crates
[Image: DSC06405a.jpg]
Overall dimensions of crate including vertical ribs. Length 38.5mm, width 34.5mm, height 15mm.
Bottom layer of crate excluding ribs. Length 37.5mm, width 33.5mm.
Top layer of crate excluding ribs. Length 36mm, width 32mm.
Thickness of divider in fruit crate 1mm.
Height of fruit crate including fruit 19mm.
Height of fish crate including fish 17mm.

Drums and Barrels
[Image: DSC06406a.jpg]
Barrels, overall length 38mm, width 34mm at mid-height. Height 24mm.
Barrel diameter at mid-height 16mm, at top/bottom 13mm.
Oil drums base-plate, 38.5mm x 34.5mm x 3mm.
Oil drum height from base-plate 23mm, diameter of drum 17mm, diameter of lid & bands 18mm.

Trees
[Image: DSC06407a.jpg]
Base-plate, 38.5mm x 34.5mm x 2.5mm, with corners rounded to 8.5mm radius.
Height including base-plate 32mm.
Diameter of tree-trunk 15mm.
Height of conical green section 21mm, diameter at base of same 21mm.
[-] The following 2 users Like chrisjo's post:
  • generic_truck_69420, Super
Thanks once again Dr Chris for taking the time to help out a fellow Member.

Ffar...do these measurements help you? Undecided
So what happened Ffar? Did you notice my replies at all?
I'm gonna be real here I didn't actually see this until just now, I've not really been on the forums much recently.

Thanks for the measurements, these do help quite a bit.
name's roxaclock, see ya around!
Please come back and update us with what you are doing with all these measurements that Chrisjp so kindly provided you Ffar.



Users browsing this thread: 2 Guest(s)