well, couple of weeks and its my clubs bi-annual show.
at this stage i have 2 trestle tables to fill, of which ive got one plan done and dusted.
not sure what im going to with the other as its going to be viewed lengthways instead of side on. so this way I instead of this way --- things at the back will be hard for the public to see, so i might keep the running tracks towards the front and put something else at the back.
i want to show each range from tomy dark blue right through to trackmaster revolution. my initial plan was to have both trackmaster designs on the bottom and use girders to elevate the tomy dark and light blue, using the appropriate girders. wont be overly exciting, but i dont know what else to do.
this is the table ive done so far. im in the door and this table will be the first one seen by the public. the minis will be up against the wall basically, and the other table will be behind [where the heater is basically] with a space for access for myself.
the track running around the edge will likely change at the back as i only have one red u turn and wont get another in time, so will most likely take that out and replace with straights. im also going to have bollards, but the clear tunnels will ensure safety for the engine.
i want to running tracks to be mostly visible to kidlets, who will likely be eyelevel with the tables, which is why i dont really want much at the far end where they wont be able to see clearly. im half considering leaving the table legs folded up and thus putting things almost on the floor which would make things easier to see and open up so many more ideas.
at this stage i have 2 trestle tables to fill, of which ive got one plan done and dusted.
not sure what im going to with the other as its going to be viewed lengthways instead of side on. so this way I instead of this way --- things at the back will be hard for the public to see, so i might keep the running tracks towards the front and put something else at the back.
i want to show each range from tomy dark blue right through to trackmaster revolution. my initial plan was to have both trackmaster designs on the bottom and use girders to elevate the tomy dark and light blue, using the appropriate girders. wont be overly exciting, but i dont know what else to do.
this is the table ive done so far. im in the door and this table will be the first one seen by the public. the minis will be up against the wall basically, and the other table will be behind [where the heater is basically] with a space for access for myself.
the track running around the edge will likely change at the back as i only have one red u turn and wont get another in time, so will most likely take that out and replace with straights. im also going to have bollards, but the clear tunnels will ensure safety for the engine.
i want to running tracks to be mostly visible to kidlets, who will likely be eyelevel with the tables, which is why i dont really want much at the far end where they wont be able to see clearly. im half considering leaving the table legs folded up and thus putting things almost on the floor which would make things easier to see and open up so many more ideas.
my website address has changed: https://sunscollections.weebly.com/