Plarail Derek

[Super]

There also also the 'Plug' used to cover the opening where an on/off switch was that is glued on which on some is easy to get off and on others a little trickier. For the Plug its best to use a flat Xacto blade from the underside of the shell. However if they used too much glue near the clips of the shell where it holds on to the chassis then its pretty much impossible to get the shell off without breaking those tabs. Because I wanted that bit darker shade of grey chassis with the white handrails for dummys of the other DD51's and DE10s I have I bought many of these and most I had to cut the shell off at the tabs before I could remove the part that was glued to the chassis.