Ok, just a progress update, the base is printed (see below) as is a full size 'shelf', it works out that you can fit 6 mini's per shelf perfectly. The base may look a bit ragged round the edges, but that is purely because it was printed on a 'raft' which is a method you can use to ensure it sticks to the build plate during printing. The raft can be removed without too much trouble, or left in place to act as a bit more protection for the base.
I am now currently printing the side uprights and want to tweak the shelf just a little more to make it perfect, then I will all I will need is to print the middle supports and a full set of shelves
![[Image: IMG-20190228-130906665.jpg]](https://i.postimg.cc/6pWhryzC/IMG-20190228-130906665.jpg)
I am now currently printing the side uprights and want to tweak the shelf just a little more to make it perfect, then I will all I will need is to print the middle supports and a full set of shelves

![[Image: IMG-20190228-130906665.jpg]](https://i.postimg.cc/6pWhryzC/IMG-20190228-130906665.jpg)
![[Image: IMG-20190228-190011044.jpg]](https://i.postimg.cc/5Nq3Qw5x/IMG-20190228-190011044.jpg)
Happily collecting things all my life...
