Trackmaster Donald/Douglas Help

Hello there!

I am quite in a pickle with one of my Trackmaster engines. It is a 2007 Trackmaster Donald/Douglas. I was having trouble free rolling this train, so I took it apart and removed the hair by the wheel. It moves better now, but I am having trouble putting it back on! It's with the part shown below.




If the picture doesn't show up, it's the shell that makes up most of the engine body.

Whenever I put this thing on, the engine doesn't free roll, and either moves slower than the battery, or not at all.

Can anyone help me with this?

Thanks, Jack.

---

PS. It maybe caused by the back wheels getting stuck on the shell.

[Super]

Hello Jack

Welcome to BluePlasticTracks. The one I have here is different from yours as mine the whole shell comes off to change the battery and is one piece. Just guessing since I can't try it myself but is the axle all the way into, flush with the outside each drive wheel?

Hello Jack

Welcome to BluePlasticTracks. The one I have here is different from yours as mine the whole shell comes off to change the battery and is one piece. Just guessing since I can't try it myself but is the axle all the way into, flush with the outside each drive wheel?

I believe so. When I took out one of the wheels, the train worked fine. It didn't get stuck. I'll try to put it on correctly.

---

I believe so. When I took out one of the wheels, the train worked fine. It didn't get stuck. I'll try to put it on correctly.

IT WORKED! Thanks for the help!

[Super]

Excellent, glad it worked out.