The New 3D Printing Thread

408 Replies, 300090 Views

Densha

04-09-2025, 12:01 PM

Junior Grandfather

#407

Thanks Ron, I've made five , one pair to keep, the others to give away.

I have learned from making HJFuji's tracks that it is easier to print the halves separately and then glue them together rather than to print in one go. That way no support is needed.

Photos to follow.

The following 2 users Like Densha's post:
• Destination Realization, Ron Thunderr

Like
Reply

Messages In This Thread

The New 3D Printing Thread - by Nigels - 01-18-2019, 11:20 PM

RE: The New 3D Printing Thread - by Super - 01-19-2019, 01:35 AM

RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 07:11 AM

RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 08:23 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-19-2019, 08:08 PM

RE: The New 3D Printing Thread - by Super - 01-19-2019, 08:40 PM

RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 09:57 PM

RE: The New 3D Printing Thread - by Nigels - 01-22-2019, 10:51 PM

RE: The New 3D Printing Thread - by Super - 01-23-2019, 12:56 AM

RE: The New 3D Printing Thread - by Nigels - 01-23-2019, 07:42 AM

RE: The New 3D Printing Thread - by Super - 01-23-2019, 08:18 AM

RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 01:31 AM

RE: The New 3D Printing Thread - by Super - 01-24-2019, 07:55 AM

RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 11:31 PM

RE: The New 3D Printing Thread - by Nigels - 01-29-2019, 10:26 PM

RE: The New 3D Printing Thread - by Super - 01-29-2019, 10:39 PM

RE: The New 3D Printing Thread - by Nigels - 01-30-2019, 01:27 AM

RE: The New 3D Printing Thread - by Nigels - 02-01-2019, 06:54 PM

RE: The New 3D Printing Thread - by chrisjo - 02-01-2019, 10:46 PM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 01:14 AM

RE: The New 3D Printing Thread - by Super - 02-02-2019, 07:01 AM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 10:48 AM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 02:35 PM

RE: The New 3D Printing Thread - by Super - 02-02-2019, 03:34 PM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 04:09 PM

RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 10:15 AM

RE: The New 3D Printing Thread - by Super - 02-03-2019, 01:57 PM

RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 07:04 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-03-2019, 11:35 PM

RE: The New 3D Printing Thread - by chrisjo - 02-04-2019, 08:24 PM

RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 11:57 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-04-2019, 08:53 PM

RE: The New 3D Printing Thread - by Nigels - 02-05-2019, 11:42 PM

RE: The New 3D Printing Thread - by Super - 02-06-2019, 10:30 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 02-08-2019, 02:03 AM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-08-2019, 02:21 AM

RE: The New 3D Printing Thread - by Nigels - 02-09-2019, 10:49 AM

RE: The New 3D Printing Thread - by Super - 02-09-2019, 12:30 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 02-09-2019, 08:31 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-10-2019, 01:57 AM

RE: The New 3D Printing Thread - by Nigels - 02-12-2019, 05:47 AM

RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 01:26 AM

RE: The New 3D Printing Thread - by ripley802 - 02-22-2019, 02:00 AM

RE: The New 3D Printing Thread - by Super - 02-22-2019, 07:16 AM

RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 06:01 PM

RE: The New 3D Printing Thread - by Super - 02-22-2019, 11:26 PM

RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 04:29 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-24-2019, 06:29 PM

RE: The New 3D Printing Thread - by Off The Rails - 02-24-2019, 10:45 PM

RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 11:35 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-05-2019, 12:39 AM

RE: The New 3D Printing Thread - by Nigels - 03-05-2019, 04:44 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-06-2019, 06:15 PM

RE: The New 3D Printing Thread - by Nigels - 03-17-2019, 08:44 PM

RE: The New 3D Printing Thread - by Super - 03-18-2019, 12:18 AM

RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 02:41 AM

RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:40 AM

RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 08:28 PM

RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:09 PM

RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 12:24 AM

RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:34 AM

RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 06:48 PM

RE: The New 3D Printing Thread - by Super - 03-19-2019, 06:55 PM

RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 10:14 PM

RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:29 PM

RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 12:06 AM

RE: The New 3D Printing Thread - by sunhuntin - 03-20-2019, 05:43 AM

RE: The New 3D Printing Thread - by Super - 03-20-2019, 12:22 PM

RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 07:30 PM

RE: The New 3D Printing Thread - by FlyingFordFalcon - 03-26-2019, 11:49 PM

RE: The New 3D Printing Thread - by FlyingFordFalcon - 04-03-2019, 04:44 AM

RE: The New 3D Printing Thread - by Nigels - 04-03-2019, 06:06 AM

RE: The New 3D Printing Thread - by FlyingFordFalcon - 04-03-2019, 06:29 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-21-2019, 06:53 PM

RE: The New 3D Printing Thread - by Nigels - 04-21-2019, 08:16 PM

RE: The New 3D Printing Thread - by Nigels - 05-27-2019, 06:17 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-20-2019, 02:54 AM

RE: The New 3D Printing Thread - by Super - 05-28-2019, 12:07 AM

RE: The New 3D Printing Thread - by Finno - 05-28-2019, 09:24 AM

RE: The New 3D Printing Thread - by 2ARail - 06-17-2019, 03:01 PM

RE: The New 3D Printing Thread - by Nigels - 06-17-2019, 06:36 PM

RE: The New 3D Printing Thread - by Super - 06-17-2019, 06:47 PM

RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 10:35 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-20-2019, 10:55 PM

RE: The New 3D Printing Thread - by Super - 06-20-2019, 11:01 PM

RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 11:59 PM

RE: The New 3D Printing Thread - by Super - 06-21-2019, 12:40 AM

RE: The New 3D Printing Thread - by Nigels - 06-21-2019, 08:31 AM

RE: The New 3D Printing Thread - by DalaGStanator - 06-21-2019, 08:07 AM

RE: The New 3D Printing Thread - by Nigels - 06-22-2019, 12:54 AM

RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 05:20 PM

RE: The New 3D Printing Thread - by Super - 07-28-2019, 07:10 PM

RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 09:50 PM

RE: The New 3D Printing Thread - by Super - 07-29-2019, 11:55 AM

RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 01:05 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 07-29-2019, 10:39 PM

RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 11:14 PM

RE: The New 3D Printing Thread - by Super - 07-30-2019, 07:39 AM

RE: The New 3D Printing Thread - by Nigels - 07-30-2019, 09:12 AM

RE: The New 3D Printing Thread - by Nigels - 08-07-2019, 09:08 PM

RE: The New 3D Printing Thread - by Super - 08-07-2019, 10:33 PM

RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 12:22 AM

RE: The New 3D Printing Thread - by Super - 08-08-2019, 01:59 AM

RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 10:38 PM

RE: The New 3D Printing Thread - by Super - 08-09-2019, 03:46 AM

RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 03:15 PM

RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 07:12 PM

RE: The New 3D Printing Thread - by Super - 08-11-2019, 11:59 AM

RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 08:12 PM

RE: The New 3D Printing Thread - by AdamdBoyd - 11-21-2020, 09:46 PM

RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 09:21 PM

RE: The New 3D Printing Thread - by Super - 08-12-2019, 11:45 AM

RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:45 PM

RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:56 PM

RE: The New 3D Printing Thread - by Nigels - 08-15-2019, 09:01 PM

RE: The New 3D Printing Thread - by ripley802 - 08-15-2019, 11:19 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 09-17-2019, 10:51 AM

RE: The New 3D Printing Thread - by Super - 08-16-2019, 03:22 AM

RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:07 PM

RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:10 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 09-16-2019, 09:25 PM

RE: The New 3D Printing Thread - by Super - 09-17-2019, 02:44 AM

RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 06:39 PM

RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 09:53 PM

RE: The New 3D Printing Thread - by Super - 09-18-2019, 09:19 AM

RE: The New 3D Printing Thread - by Nigels - 09-18-2019, 08:14 PM

RE: The New 3D Printing Thread - by Super - 09-19-2019, 03:31 PM

RE: The New 3D Printing Thread - by Nigels - 09-19-2019, 10:20 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 09-19-2019, 10:25 PM

RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 06:21 PM

RE: The New 3D Printing Thread - by Super - 09-20-2019, 07:21 PM

RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 08:45 PM

RE: The New 3D Printing Thread - by Super - 09-20-2019, 09:13 PM

RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 09:37 PM

RE: The New 3D Printing Thread - by Nigels - 09-25-2019, 08:14 PM

RE: The New 3D Printing Thread - by Super - 09-26-2019, 09:31 AM

RE: The New 3D Printing Thread - by Nigels - 09-26-2019, 09:03 PM

RE: The New 3D Printing Thread - by Super - 09-27-2019, 02:07 AM

RE: The New 3D Printing Thread - by Nigels - 10-04-2019, 09:59 PM

RE: The New 3D Printing Thread - by Super - 10-05-2019, 12:25 AM

RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 01:32 AM

RE: The New 3D Printing Thread - by Super - 10-05-2019, 04:52 AM

RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 09:38 PM

RE: The New 3D Printing Thread - by Super - 10-05-2019, 11:30 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 10-06-2019, 12:08 AM

RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 12:35 AM

RE: The New 3D Printing Thread - by leylandvictory2 - 10-07-2019, 11:11 PM

RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:53 PM

RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 07:57 PM

RE: The New 3D Printing Thread - by Super - 10-07-2019, 12:40 AM

RE: The New 3D Printing Thread - by Nigels - 10-07-2019, 08:42 PM

RE: The New 3D Printing Thread - by Super - 10-07-2019, 09:22 PM

RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:55 PM

RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 10:03 PM

RE: The New 3D Printing Thread - by Super - 10-09-2019, 12:14 AM

RE: The New 3D Printing Thread - by Nigels - 10-15-2019, 10:55 PM

RE: The New 3D Printing Thread - by Super - 10-16-2019, 12:08 AM

RE: The New 3D Printing Thread - by Nigels - 10-16-2019, 12:23 AM

RE: The New 3D Printing Thread - by Super - 10-16-2019, 02:35 AM

RE: The New 3D Printing Thread - by Nigels - 10-18-2019, 10:43 PM

RE: The New 3D Printing Thread - by Super - 10-19-2019, 08:37 AM

RE: The New 3D Printing Thread - by Nigels - 10-19-2019, 05:42 PM

RE: The New 3D Printing Thread - by drew5195 - 10-21-2019, 06:58 AM

RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:11 PM

RE: The New 3D Printing Thread - by chrisjo - 10-22-2019, 05:11 PM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:44 PM

RE: The New 3D Printing Thread - by Super - 10-21-2019, 08:14 AM

RE: The New 3D Printing Thread - by drew5195 - 10-22-2019, 04:32 AM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:42 PM

RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:28 PM

RE: The New 3D Printing Thread - by Super - 10-21-2019, 09:10 PM

RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 11:14 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 10-21-2019, 10:47 PM

RE: The New 3D Printing Thread - by Super - 10-22-2019, 05:38 PM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:45 PM

RE: The New 3D Printing Thread - by Super - 10-23-2019, 07:35 PM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 07:43 PM

RE: The New 3D Printing Thread - by Nigels - 10-29-2019, 09:04 PM

RE: The New 3D Printing Thread - by Super - 10-29-2019, 09:24 PM

RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 12:52 AM

RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 06:11 PM

RE: The New 3D Printing Thread - by Super - 10-30-2019, 01:34 PM

RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 09:23 PM

RE: The New 3D Printing Thread - by Super - 10-30-2019, 09:31 PM

RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 10:11 PM

RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 09:54 PM

RE: The New 3D Printing Thread - by Super - 10-30-2019, 10:36 PM

RE: The New 3D Printing Thread - by Nigels - 10-31-2019, 09:36 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-14-2020, 03:38 AM

RE: The New 3D Printing Thread - by Nigels - 05-11-2020, 06:12 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 05-11-2020, 08:39 AM

RE: The New 3D Printing Thread - by Nigels - 05-13-2020, 07:49 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 05-13-2020, 08:19 PM

RE: The New 3D Printing Thread - by Nigels - 06-03-2020, 11:23 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-04-2020, 12:27 AM

RE: The New 3D Printing Thread - by Super - 06-04-2020, 10:38 AM

RE: The New 3D Printing Thread - by Nigels - 06-04-2020, 09:41 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-04-2020, 07:50 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 11-21-2020, 10:37 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 06-26-2022, 05:09 AM

RE: The New 3D Printing Thread - by Super - 06-26-2022, 12:06 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-07-2022, 02:00 PM

RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 04:52 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-07-2022, 05:02 PM

RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 11:12 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-08-2022, 01:54 AM

RE: The New 3D Printing Thread - by Nigels - 07-08-2022, 05:14 PM

RE: The New 3D Printing Thread - by Super - 07-08-2022, 09:38 AM

RE: The New 3D Printing Thread - by Super - 07-10-2022, 11:14 AM

RE: The New 3D Printing Thread - by Nigels - 07-10-2022, 09:22 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-11-2022, 02:19 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-11-2022, 06:10 PM

RE: The New 3D Printing Thread - by Nigels - 07-11-2022, 10:17 PM

RE: The New 3D Printing Thread - by DalaGStanator - 07-11-2022, 07:32 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 04:41 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 09:18 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 09:19 AM

RE: The New 3D Printing Thread - by Super - 07-12-2022, 10:40 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 12:35 PM

RE: The New 3D Printing Thread - by Nigels - 07-12-2022, 08:01 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-13-2022, 02:15 PM

RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:09 PM

RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:13 PM

RE: The New 3D Printing Thread - by chrisjo - 07-14-2022, 06:25 AM

RE: The New 3D Printing Thread - by Nigels - 07-14-2022, 09:33 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-15-2022, 02:26 AM

RE: The New 3D Printing Thread - by Nigels - 07-16-2022, 03:34 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-16-2022, 05:36 PM

RE: The New 3D Printing Thread - by Super - 07-15-2022, 10:12 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-16-2022, 05:47 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 09-03-2022, 06:31 PM

RE: The New 3D Printing Thread - by ERTLSixteen - 11-20-2022, 07:14 AM

RE: The New 3D Printing Thread - by juhs - 12-20-2022, 06:10 AM

RE: The New 3D Printing Thread - by mitzalplik - 12-23-2022, 07:22 PM

RE: The New 3D Printing Thread - by Super - 12-20-2022, 08:32 AM

RE: The New 3D Printing Thread - by chrisjo - 12-28-2022, 09:36 PM

RE: The New 3D Printing Thread - by Super - 12-29-2022, 06:24 AM

RE: The New 3D Printing Thread - by Nigels - 12-29-2022, 09:31 PM

RE: The New 3D Printing Thread - by Super - 12-29-2022, 10:00 PM

RE: The New 3D Printing Thread - by chrisjo - 12-29-2022, 10:21 PM

RE: The New 3D Printing Thread - by Super - 12-30-2022, 08:32 AM

RE: The New 3D Printing Thread - by chrisjo - 12-30-2022, 04:37 PM

RE: The New 3D Printing Thread - by Nigels - 12-30-2022, 09:04 PM

RE: The New 3D Printing Thread - by Nigels - 12-31-2022, 05:31 PM

RE: The New 3D Printing Thread - by Nigels - 01-05-2023, 10:41 PM

RE: The New 3D Printing Thread - by Super - 01-06-2023, 09:00 AM

RE: The New 3D Printing Thread - by chrisjo - 01-06-2023, 05:20 PM

RE: The New 3D Printing Thread - by Nigels - 01-06-2023, 09:22 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-09-2023, 07:33 PM

RE: The New 3D Printing Thread - by Nigels - 01-10-2023, 10:30 PM

RE: The New 3D Printing Thread - by plarnold - 01-14-2023, 05:09 AM

RE: The New 3D Printing Thread - by chrisjo - 01-14-2023, 10:04 AM

RE: The New 3D Printing Thread - by Ron Thunderr - 01-13-2023, 12:15 PM

RE: The New 3D Printing Thread - by Super - 01-13-2023, 03:24 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-14-2023, 02:17 AM

RE: The New 3D Printing Thread - by chrisjo - 01-18-2023, 06:04 PM

RE: The New 3D Printing Thread - by Nigels - 01-18-2023, 09:50 PM

RE: The New 3D Printing Thread - by chrisjo - 01-20-2023, 04:18 PM

RE: The New 3D Printing Thread - by Nigels - 01-20-2023, 10:19 PM

RE: The New 3D Printing Thread - by Super - 01-21-2023, 09:36 AM

RE: The New 3D Printing Thread - by chrisjo - 01-21-2023, 11:22 AM

RE: The New 3D Printing Thread - by Super - 01-21-2023, 11:30 AM

RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:38 PM

RE: The New 3D Printing Thread - by drew5195 - 01-21-2023, 09:03 PM

RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:46 PM

RE: The New 3D Printing Thread - by Super - 01-22-2023, 12:53 AM

RE: The New 3D Printing Thread - by Nigels - 01-22-2023, 06:43 PM

RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 11:40 AM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-23-2023, 11:47 AM

RE: The New 3D Printing Thread - by Nigels - 01-23-2023, 08:32 PM

RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 09:04 PM

RE: The New 3D Printing Thread - by Nigels - 01-25-2023, 09:06 PM

RE: The New 3D Printing Thread - by Super - 01-23-2023, 10:33 PM

RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 10:46 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 01-25-2023, 02:45 AM

RE: The New 3D Printing Thread - by Super - 01-25-2023, 07:44 AM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-25-2023, 08:10 AM

RE: The New 3D Printing Thread - by chrisjo - 01-25-2023, 09:47 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-29-2023, 04:19 AM

RE: The New 3D Printing Thread - by juhs - 02-08-2023, 05:36 AM

RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 07:53 AM

RE: The New 3D Printing Thread - by Super - 02-08-2023, 10:15 AM

RE: The New 3D Printing Thread - by Ron Thunderr - 02-08-2023, 01:41 PM

RE: The New 3D Printing Thread - by Super - 02-08-2023, 05:40 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 02-08-2023, 06:05 PM

RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 06:58 PM

RE: The New 3D Printing Thread - by chrisjo - 03-11-2023, 02:14 PM

RE: The New 3D Printing Thread - by Nigels - 03-12-2023, 01:08 AM

RE: The New 3D Printing Thread - by Super - 03-12-2023, 05:25 AM

RE: The New 3D Printing Thread - by Nigels - 03-13-2023, 12:37 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-26-2023, 08:19 PM

RE: The New 3D Printing Thread - by Nigels - 03-26-2023, 10:07 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-27-2023, 01:29 AM

RE: The New 3D Printing Thread - by Super - 03-26-2023, 11:22 PM

RE: The New 3D Printing Thread - by Super - 03-27-2023, 01:39 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-27-2023, 10:57 PM

RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 10:47 AM

RE: The New 3D Printing Thread - by jbdolan - 04-05-2023, 09:32 PM

RE: The New 3D Printing Thread - by Nigels - 04-06-2023, 09:08 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-06-2023, 10:04 PM

RE: The New 3D Printing Thread - by chrisjo - 03-27-2023, 01:38 PM

RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 09:11 PM

RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 07:25 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-29-2023, 01:48 AM

RE: The New 3D Printing Thread - by Therealblack64YT - 03-28-2023, 08:14 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-29-2023, 01:50 AM

RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 09:50 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-05-2023, 03:09 AM

RE: The New 3D Printing Thread - by chrisjo - 04-05-2023, 08:11 AM

RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:39 AM

RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:13 PM

RE: The New 3D Printing Thread - by jbdolan - 04-07-2023, 05:47 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-07-2023, 08:37 PM

RE: The New 3D Printing Thread - by Super - 04-07-2023, 09:07 AM

RE: The New 3D Printing Thread - by chrisjo - 04-08-2023, 07:40 AM

RE: The New 3D Printing Thread - by Nigels - 04-08-2023, 10:15 PM

RE: The New 3D Printing Thread - by jbdolan - 04-08-2023, 06:46 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-08-2023, 11:32 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 05:26 PM

RE: The New 3D Printing Thread - by Super - 04-09-2023, 10:14 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 10:54 PM

RE: The New 3D Printing Thread - by Nigels - 04-10-2023, 07:57 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-11-2023, 02:06 PM

RE: The New 3D Printing Thread - by Nigels - 04-11-2023, 08:01 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-12-2023, 01:35 PM

RE: The New 3D Printing Thread - by Nigels - 04-12-2023, 09:15 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-13-2023, 01:17 AM

RE: The New 3D Printing Thread - by Ron Thunderr - 05-13-2023, 03:59 AM

RE: The New 3D Printing Thread - by Super - 05-13-2023, 04:06 AM

RE: The New 3D Printing Thread - by Nigels - 05-13-2023, 03:35 PM

RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 04:54 AM

RE: The New 3D Printing Thread - by Nigels - 05-31-2023, 07:33 PM

RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 08:51 PM

RE: The New 3D Printing Thread - by Densha - 06-27-2023, 01:20 AM

RE: The New 3D Printing Thread - by Super - 05-31-2023, 11:42 AM

RE: The New 3D Printing Thread - by Super - 05-31-2023, 08:10 PM

RE: The New 3D Printing Thread - by drew5195 - 07-10-2023, 12:54 AM

RE: The New 3D Printing Thread - by Super - 07-10-2023, 04:42 AM

RE: The New 3D Printing Thread - by Nigels - 07-27-2023, 07:35 PM

RE: The New 3D Printing Thread - by Super - 07-28-2023, 12:13 AM

RE: The New 3D Printing Thread - by chrisjo - 07-28-2023, 08:36 AM

RE: The New 3D Printing Thread - by Super - 07-28-2023, 08:52 AM

RE: The New 3D Printing Thread - by drew5195 - 07-28-2023, 10:56 AM

RE: The New 3D Printing Thread - by Nigels - 08-05-2023, 03:57 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 08-12-2023, 04:05 PM

RE: The New 3D Printing Thread - by Densha - 08-13-2023, 08:01 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 08-13-2023, 09:47 PM

RE: The New 3D Printing Thread - by chrisjo - 08-16-2023, 12:05 PM

RE: The New 3D Printing Thread - by Super - 08-17-2023, 02:03 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 06:58 PM

RE: The New 3D Printing Thread - by Super - 11-13-2023, 07:38 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 07:48 PM

RE: The New 3D Printing Thread - by Nigels - 11-13-2023, 08:59 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 11-14-2023, 07:27 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 11-14-2023, 06:09 AM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-19-2024, 01:01 PM

RE: The New 3D Printing Thread - by Nigels - 01-19-2024, 07:50 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-20-2024, 06:13 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-26-2024, 06:23 PM

RE: The New 3D Printing Thread - by Super - 01-27-2024, 11:09 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-28-2024, 05:08 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 02-17-2024, 07:19 PM

RE: The New 3D Printing Thread - by Nigels - 02-19-2024, 12:16 AM

RE: The New 3D Printing Thread - by Nigels - 03-14-2024, 11:47 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 03-17-2024, 01:04 PM

RE: The New 3D Printing Thread - by Nigels - 03-18-2024, 09:06 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 03-20-2024, 05:11 PM

RE: The New 3D Printing Thread - by Nigels - 03-20-2024, 11:01 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 03-15-2024, 06:08 AM

RE: The New 3D Printing Thread - by Nigels - 03-15-2024, 02:16 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 03-30-2024, 08:35 PM

RE: The New 3D Printing Thread - by Super - 03-31-2024, 11:59 AM

RE: The New 3D Printing Thread - by Nigels - 03-31-2024, 07:47 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 07-30-2024, 09:01 AM

RE: The New 3D Printing Thread - by NMsTrains - 11-08-2024, 12:58 PM

RE: The New 3D Printing Thread - by Super - 11-08-2024, 03:00 PM

RE: The New 3D Printing Thread - by Densha - 11-09-2024, 10:40 AM

RE: The New 3D Printing Thread - by DrMopp1966 - 11-10-2024, 01:06 PM

RE: The New 3D Printing Thread - by chrisjo - 11-11-2024, 11:25 PM

RE: The New 3D Printing Thread - by DrMopp1966 - 11-11-2024, 11:29 PM

RE: The New 3D Printing Thread - by Nigels - 11-13-2024, 12:25 PM

RE: The New 3D Printing Thread - by Nigels - 11-11-2024, 07:00 PM

RE: The New 3D Printing Thread - by DrMopp1966 - 11-11-2024, 07:23 PM

RE: The New 3D Printing Thread - by Destination Realization - 11-12-2024, 12:10 AM

RE: The New 3D Printing Thread - by DrMopp1966 - 03-02-2025, 04:16 PM

RE: The New 3D Printing Thread - by chrisjo - 03-02-2025, 05:39 PM

RE: The New 3D Printing Thread - by Destination Realization - 03-02-2025, 05:29 PM

RE: The New 3D Printing Thread - by DrMopp1966 - 03-02-2025, 07:32 PM

RE: The New 3D Printing Thread - by Densha - 03-10-2025, 11:29 AM

RE: The New 3D Printing Thread - by DrMopp1966 - 03-10-2025, 05:50 PM

RE: The New 3D Printing Thread - by Densha - 03-15-2025, 11:26 AM

RE: The New 3D Printing Thread - by Super - 03-15-2025, 06:40 PM

RE: The New 3D Printing Thread - by DrMopp1966 - 03-15-2025, 10:47 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-03-2025, 06:52 AM

RE: The New 3D Printing Thread - by Super - 04-03-2025, 09:15 AM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-03-2025, 05:56 PM

RE: The New 3D Printing Thread - by Super - 04-03-2025, 06:27 PM

RE: The New 3D Printing Thread - by chrisjo - 04-03-2025, 06:39 PM

RE: The New 3D Printing Thread - by Super - 04-03-2025, 06:49 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-04-2025, 05:52 PM

RE: The New 3D Printing Thread - by Super - 04-04-2025, 06:40 PM

RE: The New 3D Printing Thread - by Densha - 04-06-2025, 12:24 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-06-2025, 01:52 PM

RE: The New 3D Printing Thread - by Densha - 04-09-2025, 12:01 PM

RE: The New 3D Printing Thread - by Destination Realization - 04-09-2025, 01:45 PM

RE: The New 3D Printing Thread - by nunu123 - 04-10-2025, 09:45 PM

View a Printable Version

Users browsing this thread: 2 Guest(s)