Hey everyone I did it. Thank you DuckGWR & everyone for your contributions.
So I'll try not to make this long winded; I got my gears today and picked out what I needed plus my spare rods
I measured and cut both the 2mm and 2.5mm thick rods to size thanks to DuckGWR's measures, put the gears through them, cut down the spokes on the 14T gear to 5
Put everything back together again it sounds like how I imagine it should sound like with original gears.
Thanks again to everyone for their contributions.
(This post was last modified: 01-17-2024, 02:17 AM by mitzalplik.)
So I'll try not to make this long winded; I got my gears today and picked out what I needed plus my spare rods
I measured and cut both the 2mm and 2.5mm thick rods to size thanks to DuckGWR's measures, put the gears through them, cut down the spokes on the 14T gear to 5
Put everything back together again it sounds like how I imagine it should sound like with original gears.
Thanks again to everyone for their contributions.