3D Printed Real Class Slope & Half Rails

Hi Super,

If you check the post on the guys channel you will find that he has uploaded the files for these rail pieces - Half length rail and Top/Bottom Slope rails - to Thingiverse, the links are in the video description. If you're wondering how I found out I changed the closed caption (CC) to display sub-titles by clicking the config button and telling it to auto-translate them to English.

So, basically you can print these yourself if you have a printer. Now, the one small downside, he printed these and suggests that you should print them using an SLA (aka Resin) printer. The reason for this is simply the shape of the sloped curves is such that it would be pretty difficult to get a decent quality print on an FDM printer because of the shape of the rails (in other words because they are not flat. The half length rail could potentially be printed on an FDM printer as it is at least flat, but SLA machines potentially provide higher resolution so it may be better to print them all the same way.

By the way if you check the guy's profile on Thingiverse he has a whole boatload of track pieces - I went to see if I could find the full length and curved pieces, they are there as are a whole load of other pieces including points etc... He also said in the video there will be more parts coming so to subscribe to his channel if you want to hear about them. I have done so can monitor his future posts

Have fun, Nigel