Navigation:   Blue Plastic Tracks › Blue Plastic Tracks › Modification Guides › The New 3D Printing Thread

The New 3D Printing Thread

403 Replies, 296022 Views

Trainboy90 Productions

   07-16-2022, 05:36 PM
Customizer and Filmer
#230
Nice suggestion, when I 3D printed them, it automatically adds a raft for support so they don't fall off. I did this so it doesn't take up as much space on the printer bed as it would if it were laying down.

[Image: Bhsf6QEtkfY1AzyzEs9GoiyoCa6-huUYMWCWs88k...authuser=3]
[Image: GFZVb7UunC8uYlwjzmQMRc_UGtTfr-GLe65GoA7N...authuser=3]
This is when I 3D printed some wheels, you can see some of the added rafts on the top photo.THe bottom photo is how they came out.
Making Customs, Filming Videos and looking for the purest engines. That's how I roll here on Blue Plastic Tracks.

My Twitter
(This post was last modified: 07-16-2022, 05:44 PM by Super.)
[-] The following 1 user Likes Trainboy90 Productions's post:
  • Super

Messages In This Thread
The New 3D Printing Thread - by Nigels - 01-18-2019, 11:20 PM
RE: The New 3D Printing Thread - by Super - 01-19-2019, 01:35 AM
RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 07:11 AM
RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 08:23 AM
RE: The New 3D Printing Thread - by Super - 01-19-2019, 08:40 PM
RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 09:57 PM
RE: The New 3D Printing Thread - by Nigels - 01-22-2019, 10:51 PM
RE: The New 3D Printing Thread - by Super - 01-23-2019, 12:56 AM
RE: The New 3D Printing Thread - by Nigels - 01-23-2019, 07:42 AM
RE: The New 3D Printing Thread - by Super - 01-23-2019, 08:18 AM
RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 01:31 AM
RE: The New 3D Printing Thread - by Super - 01-24-2019, 07:55 AM
RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 11:31 PM
RE: The New 3D Printing Thread - by Nigels - 01-29-2019, 10:26 PM
RE: The New 3D Printing Thread - by Super - 01-29-2019, 10:39 PM
RE: The New 3D Printing Thread - by Nigels - 01-30-2019, 01:27 AM
RE: The New 3D Printing Thread - by Nigels - 02-01-2019, 06:54 PM
RE: The New 3D Printing Thread - by chrisjo - 02-01-2019, 10:46 PM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 01:14 AM
RE: The New 3D Printing Thread - by Super - 02-02-2019, 07:01 AM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 10:48 AM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 02:35 PM
RE: The New 3D Printing Thread - by Super - 02-02-2019, 03:34 PM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 04:09 PM
RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 10:15 AM
RE: The New 3D Printing Thread - by Super - 02-03-2019, 01:57 PM
RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 07:04 PM
RE: The New 3D Printing Thread - by chrisjo - 02-04-2019, 08:24 PM
RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 11:57 PM
RE: The New 3D Printing Thread - by Nigels - 02-05-2019, 11:42 PM
RE: The New 3D Printing Thread - by Super - 02-06-2019, 10:30 AM
RE: The New 3D Printing Thread - by Nigels - 02-09-2019, 10:49 AM
RE: The New 3D Printing Thread - by Super - 02-09-2019, 12:30 PM
RE: The New 3D Printing Thread - by Nigels - 02-12-2019, 05:47 AM
RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 01:26 AM
RE: The New 3D Printing Thread - by ripley802 - 02-22-2019, 02:00 AM
RE: The New 3D Printing Thread - by Super - 02-22-2019, 07:16 AM
RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 06:01 PM
RE: The New 3D Printing Thread - by Super - 02-22-2019, 11:26 PM
RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 04:29 PM
RE: The New 3D Printing Thread - by Off The Rails - 02-24-2019, 10:45 PM
RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 11:35 PM
RE: The New 3D Printing Thread - by Nigels - 03-05-2019, 04:44 PM
RE: The New 3D Printing Thread - by Nigels - 03-17-2019, 08:44 PM
RE: The New 3D Printing Thread - by Super - 03-18-2019, 12:18 AM
RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 02:41 AM
RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:40 AM
RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 08:28 PM
RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:09 PM
RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 12:24 AM
RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:34 AM
RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 06:48 PM
RE: The New 3D Printing Thread - by Super - 03-19-2019, 06:55 PM
RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 10:14 PM
RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:29 PM
RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 12:06 AM
RE: The New 3D Printing Thread - by sunhuntin - 03-20-2019, 05:43 AM
RE: The New 3D Printing Thread - by Super - 03-20-2019, 12:22 PM
RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 07:30 PM
RE: The New 3D Printing Thread - by Nigels - 04-03-2019, 06:06 AM
RE: The New 3D Printing Thread - by Nigels - 04-21-2019, 08:16 PM
RE: The New 3D Printing Thread - by Nigels - 05-27-2019, 06:17 PM
RE: The New 3D Printing Thread - by Super - 05-28-2019, 12:07 AM
RE: The New 3D Printing Thread - by Finno - 05-28-2019, 09:24 AM
RE: The New 3D Printing Thread - by 2ARail - 06-17-2019, 03:01 PM
RE: The New 3D Printing Thread - by Nigels - 06-17-2019, 06:36 PM
RE: The New 3D Printing Thread - by Super - 06-17-2019, 06:47 PM
RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 10:35 PM
RE: The New 3D Printing Thread - by Super - 06-20-2019, 11:01 PM
RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 11:59 PM
RE: The New 3D Printing Thread - by Super - 06-21-2019, 12:40 AM
RE: The New 3D Printing Thread - by Nigels - 06-21-2019, 08:31 AM
RE: The New 3D Printing Thread - by DalaGStanator - 06-21-2019, 08:07 AM
RE: The New 3D Printing Thread - by Nigels - 06-22-2019, 12:54 AM
RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 05:20 PM
RE: The New 3D Printing Thread - by Super - 07-28-2019, 07:10 PM
RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 09:50 PM
RE: The New 3D Printing Thread - by Super - 07-29-2019, 11:55 AM
RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 01:05 PM
RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 11:14 PM
RE: The New 3D Printing Thread - by Super - 07-30-2019, 07:39 AM
RE: The New 3D Printing Thread - by Nigels - 07-30-2019, 09:12 AM
RE: The New 3D Printing Thread - by Nigels - 08-07-2019, 09:08 PM
RE: The New 3D Printing Thread - by Super - 08-07-2019, 10:33 PM
RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 12:22 AM
RE: The New 3D Printing Thread - by Super - 08-08-2019, 01:59 AM
RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 10:38 PM
RE: The New 3D Printing Thread - by Super - 08-09-2019, 03:46 AM
RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 03:15 PM
RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 07:12 PM
RE: The New 3D Printing Thread - by Super - 08-11-2019, 11:59 AM
RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 08:12 PM
RE: The New 3D Printing Thread - by AdamdBoyd - 11-21-2020, 09:46 PM
RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 09:21 PM
RE: The New 3D Printing Thread - by Super - 08-12-2019, 11:45 AM
RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:45 PM
RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:56 PM
RE: The New 3D Printing Thread - by Nigels - 08-15-2019, 09:01 PM
RE: The New 3D Printing Thread - by ripley802 - 08-15-2019, 11:19 PM
RE: The New 3D Printing Thread - by Super - 08-16-2019, 03:22 AM
RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:07 PM
RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:10 PM
RE: The New 3D Printing Thread - by Super - 09-17-2019, 02:44 AM
RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 06:39 PM
RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 09:53 PM
RE: The New 3D Printing Thread - by Super - 09-18-2019, 09:19 AM
RE: The New 3D Printing Thread - by Nigels - 09-18-2019, 08:14 PM
RE: The New 3D Printing Thread - by Super - 09-19-2019, 03:31 PM
RE: The New 3D Printing Thread - by Nigels - 09-19-2019, 10:20 PM
RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 06:21 PM
RE: The New 3D Printing Thread - by Super - 09-20-2019, 07:21 PM
RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 08:45 PM
RE: The New 3D Printing Thread - by Super - 09-20-2019, 09:13 PM
RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 09:37 PM
RE: The New 3D Printing Thread - by Nigels - 09-25-2019, 08:14 PM
RE: The New 3D Printing Thread - by Super - 09-26-2019, 09:31 AM
RE: The New 3D Printing Thread - by Nigels - 09-26-2019, 09:03 PM
RE: The New 3D Printing Thread - by Super - 09-27-2019, 02:07 AM
RE: The New 3D Printing Thread - by Nigels - 10-04-2019, 09:59 PM
RE: The New 3D Printing Thread - by Super - 10-05-2019, 12:25 AM
RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 01:32 AM
RE: The New 3D Printing Thread - by Super - 10-05-2019, 04:52 AM
RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 09:38 PM
RE: The New 3D Printing Thread - by Super - 10-05-2019, 11:30 PM
RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 12:35 AM
RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:53 PM
RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 07:57 PM
RE: The New 3D Printing Thread - by Super - 10-07-2019, 12:40 AM
RE: The New 3D Printing Thread - by Nigels - 10-07-2019, 08:42 PM
RE: The New 3D Printing Thread - by Super - 10-07-2019, 09:22 PM
RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:55 PM
RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 10:03 PM
RE: The New 3D Printing Thread - by Super - 10-09-2019, 12:14 AM
RE: The New 3D Printing Thread - by Nigels - 10-15-2019, 10:55 PM
RE: The New 3D Printing Thread - by Super - 10-16-2019, 12:08 AM
RE: The New 3D Printing Thread - by Nigels - 10-16-2019, 12:23 AM
RE: The New 3D Printing Thread - by Super - 10-16-2019, 02:35 AM
RE: The New 3D Printing Thread - by Nigels - 10-18-2019, 10:43 PM
RE: The New 3D Printing Thread - by Super - 10-19-2019, 08:37 AM
RE: The New 3D Printing Thread - by Nigels - 10-19-2019, 05:42 PM
RE: The New 3D Printing Thread - by drew5195 - 10-21-2019, 06:58 AM
RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:11 PM
RE: The New 3D Printing Thread - by chrisjo - 10-22-2019, 05:11 PM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:44 PM
RE: The New 3D Printing Thread - by Super - 10-21-2019, 08:14 AM
RE: The New 3D Printing Thread - by drew5195 - 10-22-2019, 04:32 AM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:42 PM
RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:28 PM
RE: The New 3D Printing Thread - by Super - 10-21-2019, 09:10 PM
RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 11:14 PM
RE: The New 3D Printing Thread - by Super - 10-22-2019, 05:38 PM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:45 PM
RE: The New 3D Printing Thread - by Super - 10-23-2019, 07:35 PM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 07:43 PM
RE: The New 3D Printing Thread - by Nigels - 10-29-2019, 09:04 PM
RE: The New 3D Printing Thread - by Super - 10-29-2019, 09:24 PM
RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 12:52 AM
RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 06:11 PM
RE: The New 3D Printing Thread - by Super - 10-30-2019, 01:34 PM
RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 09:23 PM
RE: The New 3D Printing Thread - by Super - 10-30-2019, 09:31 PM
RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 10:11 PM
RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 09:54 PM
RE: The New 3D Printing Thread - by Super - 10-30-2019, 10:36 PM
RE: The New 3D Printing Thread - by Nigels - 10-31-2019, 09:36 PM
RE: The New 3D Printing Thread - by Nigels - 05-11-2020, 06:12 AM
RE: The New 3D Printing Thread - by Nigels - 05-13-2020, 07:49 PM
RE: The New 3D Printing Thread - by Nigels - 06-03-2020, 11:23 PM
RE: The New 3D Printing Thread - by Super - 06-04-2020, 10:38 AM
RE: The New 3D Printing Thread - by Nigels - 06-04-2020, 09:41 PM
RE: The New 3D Printing Thread - by Super - 06-26-2022, 12:06 PM
RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 04:52 PM
RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 11:12 PM
RE: The New 3D Printing Thread - by Nigels - 07-08-2022, 05:14 PM
RE: The New 3D Printing Thread - by Super - 07-08-2022, 09:38 AM
RE: The New 3D Printing Thread - by Super - 07-10-2022, 11:14 AM
RE: The New 3D Printing Thread - by Nigels - 07-10-2022, 09:22 PM
RE: The New 3D Printing Thread - by Nigels - 07-11-2022, 10:17 PM
RE: The New 3D Printing Thread - by DalaGStanator - 07-11-2022, 07:32 PM
RE: The New 3D Printing Thread - by Super - 07-12-2022, 10:40 AM
RE: The New 3D Printing Thread - by Nigels - 07-12-2022, 08:01 PM
RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:09 PM
RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:13 PM
RE: The New 3D Printing Thread - by chrisjo - 07-14-2022, 06:25 AM
RE: The New 3D Printing Thread - by Nigels - 07-14-2022, 09:33 PM
RE: The New 3D Printing Thread - by Nigels - 07-16-2022, 03:34 PM
RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-16-2022, 05:36 PM
RE: The New 3D Printing Thread - by Super - 07-15-2022, 10:12 AM
RE: The New 3D Printing Thread - by ERTLSixteen - 11-20-2022, 07:14 AM
RE: The New 3D Printing Thread - by juhs - 12-20-2022, 06:10 AM
RE: The New 3D Printing Thread - by mitzalplik - 12-23-2022, 07:22 PM
RE: The New 3D Printing Thread - by Super - 12-20-2022, 08:32 AM
RE: The New 3D Printing Thread - by chrisjo - 12-28-2022, 09:36 PM
RE: The New 3D Printing Thread - by Super - 12-29-2022, 06:24 AM
RE: The New 3D Printing Thread - by Nigels - 12-29-2022, 09:31 PM
RE: The New 3D Printing Thread - by Super - 12-29-2022, 10:00 PM
RE: The New 3D Printing Thread - by chrisjo - 12-29-2022, 10:21 PM
RE: The New 3D Printing Thread - by Super - 12-30-2022, 08:32 AM
RE: The New 3D Printing Thread - by chrisjo - 12-30-2022, 04:37 PM
RE: The New 3D Printing Thread - by Nigels - 12-30-2022, 09:04 PM
RE: The New 3D Printing Thread - by Nigels - 12-31-2022, 05:31 PM
RE: The New 3D Printing Thread - by Nigels - 01-05-2023, 10:41 PM
RE: The New 3D Printing Thread - by Super - 01-06-2023, 09:00 AM
RE: The New 3D Printing Thread - by chrisjo - 01-06-2023, 05:20 PM
RE: The New 3D Printing Thread - by Nigels - 01-06-2023, 09:22 PM
RE: The New 3D Printing Thread - by Nigels - 01-10-2023, 10:30 PM
RE: The New 3D Printing Thread - by plarnold - 01-14-2023, 05:09 AM
RE: The New 3D Printing Thread - by chrisjo - 01-14-2023, 10:04 AM
RE: The New 3D Printing Thread - by Ron Thunderr - 01-13-2023, 12:15 PM
RE: The New 3D Printing Thread - by Super - 01-13-2023, 03:24 PM
RE: The New 3D Printing Thread - by chrisjo - 01-18-2023, 06:04 PM
RE: The New 3D Printing Thread - by Nigels - 01-18-2023, 09:50 PM
RE: The New 3D Printing Thread - by chrisjo - 01-20-2023, 04:18 PM
RE: The New 3D Printing Thread - by Nigels - 01-20-2023, 10:19 PM
RE: The New 3D Printing Thread - by Super - 01-21-2023, 09:36 AM
RE: The New 3D Printing Thread - by chrisjo - 01-21-2023, 11:22 AM
RE: The New 3D Printing Thread - by Super - 01-21-2023, 11:30 AM
RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:38 PM
RE: The New 3D Printing Thread - by drew5195 - 01-21-2023, 09:03 PM
RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:46 PM
RE: The New 3D Printing Thread - by Super - 01-22-2023, 12:53 AM
RE: The New 3D Printing Thread - by Nigels - 01-22-2023, 06:43 PM
RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 11:40 AM
RE: The New 3D Printing Thread - by Nigels - 01-23-2023, 08:32 PM
RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 09:04 PM
RE: The New 3D Printing Thread - by Nigels - 01-25-2023, 09:06 PM
RE: The New 3D Printing Thread - by Super - 01-23-2023, 10:33 PM
RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 10:46 PM
RE: The New 3D Printing Thread - by Super - 01-25-2023, 07:44 AM
RE: The New 3D Printing Thread - by chrisjo - 01-25-2023, 09:47 AM
RE: The New 3D Printing Thread - by juhs - 02-08-2023, 05:36 AM
RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 07:53 AM
RE: The New 3D Printing Thread - by Super - 02-08-2023, 10:15 AM
RE: The New 3D Printing Thread - by Ron Thunderr - 02-08-2023, 01:41 PM
RE: The New 3D Printing Thread - by Super - 02-08-2023, 05:40 PM
RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 06:58 PM
RE: The New 3D Printing Thread - by chrisjo - 03-11-2023, 02:14 PM
RE: The New 3D Printing Thread - by Nigels - 03-12-2023, 01:08 AM
RE: The New 3D Printing Thread - by Super - 03-12-2023, 05:25 AM
RE: The New 3D Printing Thread - by Nigels - 03-13-2023, 12:37 AM
RE: The New 3D Printing Thread - by Nigels - 03-26-2023, 10:07 PM
RE: The New 3D Printing Thread - by Super - 03-26-2023, 11:22 PM
RE: The New 3D Printing Thread - by Super - 03-27-2023, 01:39 AM
RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 10:47 AM
RE: The New 3D Printing Thread - by jbdolan - 04-05-2023, 09:32 PM
RE: The New 3D Printing Thread - by Nigels - 04-06-2023, 09:08 PM
RE: The New 3D Printing Thread - by chrisjo - 03-27-2023, 01:38 PM
RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 09:11 PM
RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 07:25 PM
RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 09:50 PM
RE: The New 3D Printing Thread - by chrisjo - 04-05-2023, 08:11 AM
RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:39 AM
RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:13 PM
RE: The New 3D Printing Thread - by jbdolan - 04-07-2023, 05:47 AM
RE: The New 3D Printing Thread - by Super - 04-07-2023, 09:07 AM
RE: The New 3D Printing Thread - by chrisjo - 04-08-2023, 07:40 AM
RE: The New 3D Printing Thread - by Nigels - 04-08-2023, 10:15 PM
RE: The New 3D Printing Thread - by jbdolan - 04-08-2023, 06:46 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 05:26 PM
RE: The New 3D Printing Thread - by Super - 04-09-2023, 10:14 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 10:54 PM
RE: The New 3D Printing Thread - by Nigels - 04-10-2023, 07:57 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-11-2023, 02:06 PM
RE: The New 3D Printing Thread - by Nigels - 04-11-2023, 08:01 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-12-2023, 01:35 PM
RE: The New 3D Printing Thread - by Nigels - 04-12-2023, 09:15 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 05-13-2023, 03:59 AM
RE: The New 3D Printing Thread - by Super - 05-13-2023, 04:06 AM
RE: The New 3D Printing Thread - by Nigels - 05-13-2023, 03:35 PM
RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 04:54 AM
RE: The New 3D Printing Thread - by Nigels - 05-31-2023, 07:33 PM
RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 08:51 PM
RE: The New 3D Printing Thread - by Densha - 06-27-2023, 01:20 AM
RE: The New 3D Printing Thread - by Super - 05-31-2023, 11:42 AM
RE: The New 3D Printing Thread - by Super - 05-31-2023, 08:10 PM
RE: The New 3D Printing Thread - by drew5195 - 07-10-2023, 12:54 AM
RE: The New 3D Printing Thread - by Super - 07-10-2023, 04:42 AM
RE: The New 3D Printing Thread - by Nigels - 07-27-2023, 07:35 PM
RE: The New 3D Printing Thread - by Super - 07-28-2023, 12:13 AM
RE: The New 3D Printing Thread - by chrisjo - 07-28-2023, 08:36 AM
RE: The New 3D Printing Thread - by Super - 07-28-2023, 08:52 AM
RE: The New 3D Printing Thread - by drew5195 - 07-28-2023, 10:56 AM
RE: The New 3D Printing Thread - by Nigels - 08-05-2023, 03:57 PM
RE: The New 3D Printing Thread - by Densha - 08-13-2023, 08:01 AM
RE: The New 3D Printing Thread - by chrisjo - 08-16-2023, 12:05 PM
RE: The New 3D Printing Thread - by Super - 08-17-2023, 02:03 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 06:58 PM
RE: The New 3D Printing Thread - by Super - 11-13-2023, 07:38 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 07:48 PM
RE: The New 3D Printing Thread - by Nigels - 11-13-2023, 08:59 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 11-14-2023, 07:27 AM
RE: The New 3D Printing Thread - by Nigels - 01-19-2024, 07:50 PM
RE: The New 3D Printing Thread - by Super - 01-27-2024, 11:09 PM
RE: The New 3D Printing Thread - by Nigels - 02-19-2024, 12:16 AM
RE: The New 3D Printing Thread - by Nigels - 03-14-2024, 11:47 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 03-17-2024, 01:04 PM
RE: The New 3D Printing Thread - by Nigels - 03-18-2024, 09:06 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 03-20-2024, 05:11 PM
RE: The New 3D Printing Thread - by Nigels - 03-20-2024, 11:01 PM
RE: The New 3D Printing Thread - by Nigels - 03-15-2024, 02:16 PM
RE: The New 3D Printing Thread - by Super - 03-31-2024, 11:59 AM
RE: The New 3D Printing Thread - by Nigels - 03-31-2024, 07:47 PM
RE: The New 3D Printing Thread - by NMsTrains - 11-08-2024, 12:58 PM
RE: The New 3D Printing Thread - by Super - 11-08-2024, 03:00 PM
RE: The New 3D Printing Thread - by Densha - 11-09-2024, 10:40 AM
RE: The New 3D Printing Thread - by DrMopp1966 - 11-10-2024, 01:06 PM
RE: The New 3D Printing Thread - by chrisjo - 11-11-2024, 11:25 PM
RE: The New 3D Printing Thread - by DrMopp1966 - 11-11-2024, 11:29 PM
RE: The New 3D Printing Thread - by Nigels - 11-13-2024, 12:25 PM
RE: The New 3D Printing Thread - by Nigels - 11-11-2024, 07:00 PM
RE: The New 3D Printing Thread - by DrMopp1966 - 11-11-2024, 07:23 PM
RE: The New 3D Printing Thread - by DrMopp1966 - 03-02-2025, 04:16 PM
RE: The New 3D Printing Thread - by chrisjo - 03-02-2025, 05:39 PM
RE: The New 3D Printing Thread - by DrMopp1966 - 03-02-2025, 07:32 PM
RE: The New 3D Printing Thread - by Densha - 03-10-2025, 11:29 AM
RE: The New 3D Printing Thread - by DrMopp1966 - 03-10-2025, 05:50 PM
RE: The New 3D Printing Thread - by Densha - 03-15-2025, 11:26 AM
RE: The New 3D Printing Thread - by Super - 03-15-2025, 06:40 PM
RE: The New 3D Printing Thread - by DrMopp1966 - 03-15-2025, 10:47 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-03-2025, 06:52 AM
RE: The New 3D Printing Thread - by Super - 04-03-2025, 09:15 AM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-03-2025, 05:56 PM
RE: The New 3D Printing Thread - by Super - 04-03-2025, 06:27 PM
RE: The New 3D Printing Thread - by chrisjo - 04-03-2025, 06:39 PM
RE: The New 3D Printing Thread - by Super - 04-03-2025, 06:49 PM
RE: The New 3D Printing Thread - by Ron Thunderr - Yesterday, 05:52 PM
RE: The New 3D Printing Thread - by Super - Yesterday, 06:40 PM



Users browsing this thread: 3 Guest(s)