Navigation:   Blue Plastic Tracks › Blue Plastic Tracks › Modification Guides › The New 3D Printing Thread

The New 3D Printing Thread

386 Replies, 270780 Views

Trainboy90 Productions

   07-11-2022, 02:19 AM
Customizer and Filmer
#212
I'm doing my first 3D print right now. It's that J94 just as planned. It's gonna take a little over 3 hours so hopefully it comes out good.

[Image: 16575058346225022407980747331385.jpg]

This is going to be a pretty good one hopefully.

The filament is the overture brand.

I also loaded it with Tinkercad which is what6 the printer uses.
Making Customs, Filming Videos and looking for the purest engines. That's how I roll here on Blue Plastic Tracks.

My Twitter

Messages In This Thread
The New 3D Printing Thread - by Nigels - 01-18-2019, 11:20 PM
RE: The New 3D Printing Thread - by Super - 01-19-2019, 01:35 AM
RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 07:11 AM
RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 08:23 AM
RE: The New 3D Printing Thread - by Super - 01-19-2019, 08:40 PM
RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 09:57 PM
RE: The New 3D Printing Thread - by Nigels - 01-22-2019, 10:51 PM
RE: The New 3D Printing Thread - by Super - 01-23-2019, 12:56 AM
RE: The New 3D Printing Thread - by Nigels - 01-23-2019, 07:42 AM
RE: The New 3D Printing Thread - by Super - 01-23-2019, 08:18 AM
RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 01:31 AM
RE: The New 3D Printing Thread - by Super - 01-24-2019, 07:55 AM
RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 11:31 PM
RE: The New 3D Printing Thread - by Nigels - 01-29-2019, 10:26 PM
RE: The New 3D Printing Thread - by Super - 01-29-2019, 10:39 PM
RE: The New 3D Printing Thread - by Nigels - 01-30-2019, 01:27 AM
RE: The New 3D Printing Thread - by Nigels - 02-01-2019, 06:54 PM
RE: The New 3D Printing Thread - by chrisjo - 02-01-2019, 10:46 PM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 01:14 AM
RE: The New 3D Printing Thread - by Super - 02-02-2019, 07:01 AM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 10:48 AM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 02:35 PM
RE: The New 3D Printing Thread - by Super - 02-02-2019, 03:34 PM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 04:09 PM
RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 10:15 AM
RE: The New 3D Printing Thread - by Super - 02-03-2019, 01:57 PM
RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 07:04 PM
RE: The New 3D Printing Thread - by chrisjo - 02-04-2019, 08:24 PM
RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 11:57 PM
RE: The New 3D Printing Thread - by Nigels - 02-05-2019, 11:42 PM
RE: The New 3D Printing Thread - by Super - 02-06-2019, 10:30 AM
RE: The New 3D Printing Thread - by Nigels - 02-09-2019, 10:49 AM
RE: The New 3D Printing Thread - by Super - 02-09-2019, 12:30 PM
RE: The New 3D Printing Thread - by Nigels - 02-12-2019, 05:47 AM
RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 01:26 AM
RE: The New 3D Printing Thread - by ripley802 - 02-22-2019, 02:00 AM
RE: The New 3D Printing Thread - by Super - 02-22-2019, 07:16 AM
RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 06:01 PM
RE: The New 3D Printing Thread - by Super - 02-22-2019, 11:26 PM
RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 04:29 PM
RE: The New 3D Printing Thread - by Off The Rails - 02-24-2019, 10:45 PM
RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 11:35 PM
RE: The New 3D Printing Thread - by Nigels - 03-05-2019, 04:44 PM
RE: The New 3D Printing Thread - by Nigels - 03-17-2019, 08:44 PM
RE: The New 3D Printing Thread - by Super - 03-18-2019, 12:18 AM
RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 02:41 AM
RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:40 AM
RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 08:28 PM
RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:09 PM
RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 12:24 AM
RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:34 AM
RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 06:48 PM
RE: The New 3D Printing Thread - by Super - 03-19-2019, 06:55 PM
RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 10:14 PM
RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:29 PM
RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 12:06 AM
RE: The New 3D Printing Thread - by sunhuntin - 03-20-2019, 05:43 AM
RE: The New 3D Printing Thread - by Super - 03-20-2019, 12:22 PM
RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 07:30 PM
RE: The New 3D Printing Thread - by Nigels - 04-03-2019, 06:06 AM
RE: The New 3D Printing Thread - by Nigels - 04-21-2019, 08:16 PM
RE: The New 3D Printing Thread - by Nigels - 05-27-2019, 06:17 PM
RE: The New 3D Printing Thread - by Super - 05-28-2019, 12:07 AM
RE: The New 3D Printing Thread - by Finno - 05-28-2019, 09:24 AM
RE: The New 3D Printing Thread - by 2ARail - 06-17-2019, 03:01 PM
RE: The New 3D Printing Thread - by Nigels - 06-17-2019, 06:36 PM
RE: The New 3D Printing Thread - by Super - 06-17-2019, 06:47 PM
RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 10:35 PM
RE: The New 3D Printing Thread - by Super - 06-20-2019, 11:01 PM
RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 11:59 PM
RE: The New 3D Printing Thread - by Super - 06-21-2019, 12:40 AM
RE: The New 3D Printing Thread - by Nigels - 06-21-2019, 08:31 AM
RE: The New 3D Printing Thread - by DalaGStanator - 06-21-2019, 08:07 AM
RE: The New 3D Printing Thread - by Nigels - 06-22-2019, 12:54 AM
RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 05:20 PM
RE: The New 3D Printing Thread - by Super - 07-28-2019, 07:10 PM
RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 09:50 PM
RE: The New 3D Printing Thread - by Super - 07-29-2019, 11:55 AM
RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 01:05 PM
RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 11:14 PM
RE: The New 3D Printing Thread - by Super - 07-30-2019, 07:39 AM
RE: The New 3D Printing Thread - by Nigels - 07-30-2019, 09:12 AM
RE: The New 3D Printing Thread - by Nigels - 08-07-2019, 09:08 PM
RE: The New 3D Printing Thread - by Super - 08-07-2019, 10:33 PM
RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 12:22 AM
RE: The New 3D Printing Thread - by Super - 08-08-2019, 01:59 AM
RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 10:38 PM
RE: The New 3D Printing Thread - by Super - 08-09-2019, 03:46 AM
RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 03:15 PM
RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 07:12 PM
RE: The New 3D Printing Thread - by Super - 08-11-2019, 11:59 AM
RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 08:12 PM
RE: The New 3D Printing Thread - by AdamdBoyd - 11-21-2020, 09:46 PM
RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 09:21 PM
RE: The New 3D Printing Thread - by Super - 08-12-2019, 11:45 AM
RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:45 PM
RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:56 PM
RE: The New 3D Printing Thread - by Nigels - 08-15-2019, 09:01 PM
RE: The New 3D Printing Thread - by ripley802 - 08-15-2019, 11:19 PM
RE: The New 3D Printing Thread - by Super - 08-16-2019, 03:22 AM
RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:07 PM
RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:10 PM
RE: The New 3D Printing Thread - by Super - 09-17-2019, 02:44 AM
RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 06:39 PM
RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 09:53 PM
RE: The New 3D Printing Thread - by Super - 09-18-2019, 09:19 AM
RE: The New 3D Printing Thread - by Nigels - 09-18-2019, 08:14 PM
RE: The New 3D Printing Thread - by Super - 09-19-2019, 03:31 PM
RE: The New 3D Printing Thread - by Nigels - 09-19-2019, 10:20 PM
RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 06:21 PM
RE: The New 3D Printing Thread - by Super - 09-20-2019, 07:21 PM
RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 08:45 PM
RE: The New 3D Printing Thread - by Super - 09-20-2019, 09:13 PM
RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 09:37 PM
RE: The New 3D Printing Thread - by Nigels - 09-25-2019, 08:14 PM
RE: The New 3D Printing Thread - by Super - 09-26-2019, 09:31 AM
RE: The New 3D Printing Thread - by Nigels - 09-26-2019, 09:03 PM
RE: The New 3D Printing Thread - by Super - 09-27-2019, 02:07 AM
RE: The New 3D Printing Thread - by Nigels - 10-04-2019, 09:59 PM
RE: The New 3D Printing Thread - by Super - 10-05-2019, 12:25 AM
RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 01:32 AM
RE: The New 3D Printing Thread - by Super - 10-05-2019, 04:52 AM
RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 09:38 PM
RE: The New 3D Printing Thread - by Super - 10-05-2019, 11:30 PM
RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 12:35 AM
RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:53 PM
RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 07:57 PM
RE: The New 3D Printing Thread - by Super - 10-07-2019, 12:40 AM
RE: The New 3D Printing Thread - by Nigels - 10-07-2019, 08:42 PM
RE: The New 3D Printing Thread - by Super - 10-07-2019, 09:22 PM
RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:55 PM
RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 10:03 PM
RE: The New 3D Printing Thread - by Super - 10-09-2019, 12:14 AM
RE: The New 3D Printing Thread - by Nigels - 10-15-2019, 10:55 PM
RE: The New 3D Printing Thread - by Super - 10-16-2019, 12:08 AM
RE: The New 3D Printing Thread - by Nigels - 10-16-2019, 12:23 AM
RE: The New 3D Printing Thread - by Super - 10-16-2019, 02:35 AM
RE: The New 3D Printing Thread - by Nigels - 10-18-2019, 10:43 PM
RE: The New 3D Printing Thread - by Super - 10-19-2019, 08:37 AM
RE: The New 3D Printing Thread - by Nigels - 10-19-2019, 05:42 PM
RE: The New 3D Printing Thread - by drew5195 - 10-21-2019, 06:58 AM
RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:11 PM
RE: The New 3D Printing Thread - by chrisjo - 10-22-2019, 05:11 PM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:44 PM
RE: The New 3D Printing Thread - by Super - 10-21-2019, 08:14 AM
RE: The New 3D Printing Thread - by drew5195 - 10-22-2019, 04:32 AM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:42 PM
RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:28 PM
RE: The New 3D Printing Thread - by Super - 10-21-2019, 09:10 PM
RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 11:14 PM
RE: The New 3D Printing Thread - by Super - 10-22-2019, 05:38 PM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:45 PM
RE: The New 3D Printing Thread - by Super - 10-23-2019, 07:35 PM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 07:43 PM
RE: The New 3D Printing Thread - by Nigels - 10-29-2019, 09:04 PM
RE: The New 3D Printing Thread - by Super - 10-29-2019, 09:24 PM
RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 12:52 AM
RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 06:11 PM
RE: The New 3D Printing Thread - by Super - 10-30-2019, 01:34 PM
RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 09:23 PM
RE: The New 3D Printing Thread - by Super - 10-30-2019, 09:31 PM
RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 10:11 PM
RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 09:54 PM
RE: The New 3D Printing Thread - by Super - 10-30-2019, 10:36 PM
RE: The New 3D Printing Thread - by Nigels - 10-31-2019, 09:36 PM
RE: The New 3D Printing Thread - by Nigels - 05-11-2020, 06:12 AM
RE: The New 3D Printing Thread - by Nigels - 05-13-2020, 07:49 PM
RE: The New 3D Printing Thread - by Nigels - 06-03-2020, 11:23 PM
RE: The New 3D Printing Thread - by Super - 06-04-2020, 10:38 AM
RE: The New 3D Printing Thread - by Nigels - 06-04-2020, 09:41 PM
RE: The New 3D Printing Thread - by Super - 06-26-2022, 12:06 PM
RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 04:52 PM
RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 11:12 PM
RE: The New 3D Printing Thread - by Nigels - 07-08-2022, 05:14 PM
RE: The New 3D Printing Thread - by Super - 07-08-2022, 09:38 AM
RE: The New 3D Printing Thread - by Super - 07-10-2022, 11:14 AM
RE: The New 3D Printing Thread - by Nigels - 07-10-2022, 09:22 PM
RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-11-2022, 02:19 AM
RE: The New 3D Printing Thread - by Nigels - 07-11-2022, 10:17 PM
RE: The New 3D Printing Thread - by DalaGStanator - 07-11-2022, 07:32 PM
RE: The New 3D Printing Thread - by Super - 07-12-2022, 10:40 AM
RE: The New 3D Printing Thread - by Nigels - 07-12-2022, 08:01 PM
RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:09 PM
RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:13 PM
RE: The New 3D Printing Thread - by chrisjo - 07-14-2022, 06:25 AM
RE: The New 3D Printing Thread - by Nigels - 07-14-2022, 09:33 PM
RE: The New 3D Printing Thread - by Nigels - 07-16-2022, 03:34 PM
RE: The New 3D Printing Thread - by Super - 07-15-2022, 10:12 AM
RE: The New 3D Printing Thread - by ERTLSixteen - 11-20-2022, 07:14 AM
RE: The New 3D Printing Thread - by juhs - 12-20-2022, 06:10 AM
RE: The New 3D Printing Thread - by mitzalplik - 12-23-2022, 07:22 PM
RE: The New 3D Printing Thread - by Super - 12-20-2022, 08:32 AM
RE: The New 3D Printing Thread - by chrisjo - 12-28-2022, 09:36 PM
RE: The New 3D Printing Thread - by Super - 12-29-2022, 06:24 AM
RE: The New 3D Printing Thread - by Nigels - 12-29-2022, 09:31 PM
RE: The New 3D Printing Thread - by Super - 12-29-2022, 10:00 PM
RE: The New 3D Printing Thread - by chrisjo - 12-29-2022, 10:21 PM
RE: The New 3D Printing Thread - by Super - 12-30-2022, 08:32 AM
RE: The New 3D Printing Thread - by chrisjo - 12-30-2022, 04:37 PM
RE: The New 3D Printing Thread - by Nigels - 12-30-2022, 09:04 PM
RE: The New 3D Printing Thread - by Nigels - 12-31-2022, 05:31 PM
RE: The New 3D Printing Thread - by Nigels - 01-05-2023, 10:41 PM
RE: The New 3D Printing Thread - by Super - 01-06-2023, 09:00 AM
RE: The New 3D Printing Thread - by chrisjo - 01-06-2023, 05:20 PM
RE: The New 3D Printing Thread - by Nigels - 01-06-2023, 09:22 PM
RE: The New 3D Printing Thread - by Nigels - 01-10-2023, 10:30 PM
RE: The New 3D Printing Thread - by plarnold - 01-14-2023, 05:09 AM
RE: The New 3D Printing Thread - by chrisjo - 01-14-2023, 10:04 AM
RE: The New 3D Printing Thread - by Ron Thunderr - 01-13-2023, 12:15 PM
RE: The New 3D Printing Thread - by Super - 01-13-2023, 03:24 PM
RE: The New 3D Printing Thread - by chrisjo - 01-18-2023, 06:04 PM
RE: The New 3D Printing Thread - by Nigels - 01-18-2023, 09:50 PM
RE: The New 3D Printing Thread - by chrisjo - 01-20-2023, 04:18 PM
RE: The New 3D Printing Thread - by Nigels - 01-20-2023, 10:19 PM
RE: The New 3D Printing Thread - by Super - 01-21-2023, 09:36 AM
RE: The New 3D Printing Thread - by chrisjo - 01-21-2023, 11:22 AM
RE: The New 3D Printing Thread - by Super - 01-21-2023, 11:30 AM
RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:38 PM
RE: The New 3D Printing Thread - by drew5195 - 01-21-2023, 09:03 PM
RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:46 PM
RE: The New 3D Printing Thread - by Super - 01-22-2023, 12:53 AM
RE: The New 3D Printing Thread - by Nigels - 01-22-2023, 06:43 PM
RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 11:40 AM
RE: The New 3D Printing Thread - by Nigels - 01-23-2023, 08:32 PM
RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 09:04 PM
RE: The New 3D Printing Thread - by Nigels - 01-25-2023, 09:06 PM
RE: The New 3D Printing Thread - by Super - 01-23-2023, 10:33 PM
RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 10:46 PM
RE: The New 3D Printing Thread - by Super - 01-25-2023, 07:44 AM
RE: The New 3D Printing Thread - by chrisjo - 01-25-2023, 09:47 AM
RE: The New 3D Printing Thread - by juhs - 02-08-2023, 05:36 AM
RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 07:53 AM
RE: The New 3D Printing Thread - by Super - 02-08-2023, 10:15 AM
RE: The New 3D Printing Thread - by Ron Thunderr - 02-08-2023, 01:41 PM
RE: The New 3D Printing Thread - by Super - 02-08-2023, 05:40 PM
RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 06:58 PM
RE: The New 3D Printing Thread - by chrisjo - 03-11-2023, 02:14 PM
RE: The New 3D Printing Thread - by Nigels - 03-12-2023, 01:08 AM
RE: The New 3D Printing Thread - by Super - 03-12-2023, 05:25 AM
RE: The New 3D Printing Thread - by Nigels - 03-13-2023, 12:37 AM
RE: The New 3D Printing Thread - by Nigels - 03-26-2023, 10:07 PM
RE: The New 3D Printing Thread - by Super - 03-26-2023, 11:22 PM
RE: The New 3D Printing Thread - by Super - 03-27-2023, 01:39 AM
RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 10:47 AM
RE: The New 3D Printing Thread - by jbdolan - 04-05-2023, 09:32 PM
RE: The New 3D Printing Thread - by Nigels - 04-06-2023, 09:08 PM
RE: The New 3D Printing Thread - by chrisjo - 03-27-2023, 01:38 PM
RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 09:11 PM
RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 07:25 PM
RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 09:50 PM
RE: The New 3D Printing Thread - by chrisjo - 04-05-2023, 08:11 AM
RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:39 AM
RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:13 PM
RE: The New 3D Printing Thread - by jbdolan - 04-07-2023, 05:47 AM
RE: The New 3D Printing Thread - by Super - 04-07-2023, 09:07 AM
RE: The New 3D Printing Thread - by chrisjo - 04-08-2023, 07:40 AM
RE: The New 3D Printing Thread - by Nigels - 04-08-2023, 10:15 PM
RE: The New 3D Printing Thread - by jbdolan - 04-08-2023, 06:46 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 05:26 PM
RE: The New 3D Printing Thread - by Super - 04-09-2023, 10:14 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 10:54 PM
RE: The New 3D Printing Thread - by Nigels - 04-10-2023, 07:57 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-11-2023, 02:06 PM
RE: The New 3D Printing Thread - by Nigels - 04-11-2023, 08:01 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-12-2023, 01:35 PM
RE: The New 3D Printing Thread - by Nigels - 04-12-2023, 09:15 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 05-13-2023, 03:59 AM
RE: The New 3D Printing Thread - by Super - 05-13-2023, 04:06 AM
RE: The New 3D Printing Thread - by Nigels - 05-13-2023, 03:35 PM
RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 04:54 AM
RE: The New 3D Printing Thread - by Nigels - 05-31-2023, 07:33 PM
RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 08:51 PM
RE: The New 3D Printing Thread - by Densha - 06-27-2023, 01:20 AM
RE: The New 3D Printing Thread - by Super - 05-31-2023, 11:42 AM
RE: The New 3D Printing Thread - by Super - 05-31-2023, 08:10 PM
RE: The New 3D Printing Thread - by drew5195 - 07-10-2023, 12:54 AM
RE: The New 3D Printing Thread - by Super - 07-10-2023, 04:42 AM
RE: The New 3D Printing Thread - by Nigels - 07-27-2023, 07:35 PM
RE: The New 3D Printing Thread - by Super - 07-28-2023, 12:13 AM
RE: The New 3D Printing Thread - by chrisjo - 07-28-2023, 08:36 AM
RE: The New 3D Printing Thread - by Super - 07-28-2023, 08:52 AM
RE: The New 3D Printing Thread - by drew5195 - 07-28-2023, 10:56 AM
RE: The New 3D Printing Thread - by Nigels - 08-05-2023, 03:57 PM
RE: The New 3D Printing Thread - by Densha - 08-13-2023, 08:01 AM
RE: The New 3D Printing Thread - by chrisjo - 08-16-2023, 12:05 PM
RE: The New 3D Printing Thread - by Super - 08-17-2023, 02:03 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 06:58 PM
RE: The New 3D Printing Thread - by Super - 11-13-2023, 07:38 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 07:48 PM
RE: The New 3D Printing Thread - by Nigels - 11-13-2023, 08:59 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 11-14-2023, 07:27 AM
RE: The New 3D Printing Thread - by Nigels - 01-19-2024, 07:50 PM
RE: The New 3D Printing Thread - by Super - 01-27-2024, 11:09 PM
RE: The New 3D Printing Thread - by Nigels - 02-19-2024, 12:16 AM
RE: The New 3D Printing Thread - by Nigels - 03-14-2024, 11:47 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 03-17-2024, 01:04 PM
RE: The New 3D Printing Thread - by Nigels - 03-18-2024, 09:06 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 03-20-2024, 05:11 PM
RE: The New 3D Printing Thread - by Nigels - 03-20-2024, 11:01 PM
RE: The New 3D Printing Thread - by Nigels - 03-15-2024, 02:16 PM
RE: The New 3D Printing Thread - by Super - 03-31-2024, 11:59 AM
RE: The New 3D Printing Thread - by Nigels - 03-31-2024, 07:47 PM
RE: The New 3D Printing Thread - by NMsTrains - 11-08-2024, 12:58 PM
RE: The New 3D Printing Thread - by Super - 11-08-2024, 03:00 PM
RE: The New 3D Printing Thread - by Densha - 11-09-2024, 10:40 AM
RE: The New 3D Printing Thread - by DrMopp1966 - 11-10-2024, 01:06 PM
RE: The New 3D Printing Thread - by chrisjo - 11-11-2024, 11:25 PM
RE: The New 3D Printing Thread - by DrMopp1966 - 11-11-2024, 11:29 PM
RE: The New 3D Printing Thread - by Nigels - 11-13-2024, 12:25 PM
RE: The New 3D Printing Thread - by Nigels - 11-11-2024, 07:00 PM
RE: The New 3D Printing Thread - by DrMopp1966 - 11-11-2024, 07:23 PM



Users browsing this thread: 30 Guest(s)