How to stop the eyes from moving in Bachmann Thomas locos

Hello again! Sorry for the late reply, I ended up being pretty busy over the past week. To remove the eyes from any Bachmann locomotive, you'll have to remove the gearbox completely (shown here is Thomas').


Then you'll have to open it up and remove the gears that don't go down to the wheels from the motor. This is easier if you make sure the side with all of the metal shafts connected to it are on the bottom, as it keeps the gears from falling out.




I don't think you would need to desolder anything on the model to do this, just be careful not to pull on the wires too hard. The only reason mine is disconnected is because I'm modifying my Thomas. Anyway, I hope this helps! Good luck with your models!