The New 3D Printing Thread

376 Replies, 266590 Views

Firstly Mr Ripley, apologies for not answering your query, but somehow it passed me by, I've also been away on hols, so I'm still trying to get back up to speed.

But to answer your question, yes a resin printer should be able to produce gears to a very good resolution and if you pick the right resin should produce incredibly tough and hard wearing items.

Which brings me nicely onto my latest resin print which has literally blown me away with the quality it has, this was printed using a clear blue resin at 0.05mm layer heights (yes it can go down to 0.01mm if you want) and in its finished form stands only about as high as two AA batteries end to end on top of each other.

Enjoy!

Happily collecting things all my life... Big Grin

Messages In This Thread
The New 3D Printing Thread - by Nigels - 01-18-2019, 11:20 PM
RE: The New 3D Printing Thread - by Super - 01-19-2019, 01:35 AM
RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 07:11 AM
RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 08:23 AM
RE: The New 3D Printing Thread - by Super - 01-19-2019, 08:40 PM
RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 09:57 PM
RE: The New 3D Printing Thread - by Nigels - 01-22-2019, 10:51 PM
RE: The New 3D Printing Thread - by Super - 01-23-2019, 12:56 AM
RE: The New 3D Printing Thread - by Nigels - 01-23-2019, 07:42 AM
RE: The New 3D Printing Thread - by Super - 01-23-2019, 08:18 AM
RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 01:31 AM
RE: The New 3D Printing Thread - by Super - 01-24-2019, 07:55 AM
RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 11:31 PM
RE: The New 3D Printing Thread - by Nigels - 01-29-2019, 10:26 PM
RE: The New 3D Printing Thread - by Super - 01-29-2019, 10:39 PM
RE: The New 3D Printing Thread - by Nigels - 01-30-2019, 01:27 AM
RE: The New 3D Printing Thread - by Nigels - 02-01-2019, 06:54 PM
RE: The New 3D Printing Thread - by chrisjo - 02-01-2019, 10:46 PM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 01:14 AM
RE: The New 3D Printing Thread - by Super - 02-02-2019, 07:01 AM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 10:48 AM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 02:35 PM
RE: The New 3D Printing Thread - by Super - 02-02-2019, 03:34 PM
RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 04:09 PM
RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 10:15 AM
RE: The New 3D Printing Thread - by Super - 02-03-2019, 01:57 PM
RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 07:04 PM
RE: The New 3D Printing Thread - by chrisjo - 02-04-2019, 08:24 PM
RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 11:57 PM
RE: The New 3D Printing Thread - by Nigels - 02-05-2019, 11:42 PM
RE: The New 3D Printing Thread - by Super - 02-06-2019, 10:30 AM
RE: The New 3D Printing Thread - by Nigels - 02-09-2019, 10:49 AM
RE: The New 3D Printing Thread - by Super - 02-09-2019, 12:30 PM
RE: The New 3D Printing Thread - by Nigels - 02-12-2019, 05:47 AM
RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 01:26 AM
RE: The New 3D Printing Thread - by ripley802 - 02-22-2019, 02:00 AM
RE: The New 3D Printing Thread - by Super - 02-22-2019, 07:16 AM
RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 06:01 PM
RE: The New 3D Printing Thread - by Super - 02-22-2019, 11:26 PM
RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 04:29 PM
RE: The New 3D Printing Thread - by Off The Rails - 02-24-2019, 10:45 PM
RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 11:35 PM
RE: The New 3D Printing Thread - by Nigels - 03-05-2019, 04:44 PM
RE: The New 3D Printing Thread - by Nigels - 03-17-2019, 08:44 PM
RE: The New 3D Printing Thread - by Super - 03-18-2019, 12:18 AM
RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 02:41 AM
RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:40 AM
RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 08:28 PM
RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:09 PM
RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 12:24 AM
RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:34 AM
RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 06:48 PM
RE: The New 3D Printing Thread - by Super - 03-19-2019, 06:55 PM
RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 10:14 PM
RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:29 PM
RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 12:06 AM
RE: The New 3D Printing Thread - by sunhuntin - 03-20-2019, 05:43 AM
RE: The New 3D Printing Thread - by Super - 03-20-2019, 12:22 PM
RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 07:30 PM
RE: The New 3D Printing Thread - by Nigels - 04-03-2019, 06:06 AM
RE: The New 3D Printing Thread - by Nigels - 04-21-2019, 08:16 PM
RE: The New 3D Printing Thread - by Nigels - 05-27-2019, 06:17 PM
RE: The New 3D Printing Thread - by Super - 05-28-2019, 12:07 AM
RE: The New 3D Printing Thread - by Finno - 05-28-2019, 09:24 AM
RE: The New 3D Printing Thread - by 2ARail - 06-17-2019, 03:01 PM
RE: The New 3D Printing Thread - by Nigels - 06-17-2019, 06:36 PM
RE: The New 3D Printing Thread - by Super - 06-17-2019, 06:47 PM
RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 10:35 PM
RE: The New 3D Printing Thread - by Super - 06-20-2019, 11:01 PM
RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 11:59 PM
RE: The New 3D Printing Thread - by Super - 06-21-2019, 12:40 AM
RE: The New 3D Printing Thread - by Nigels - 06-21-2019, 08:31 AM
RE: The New 3D Printing Thread - by DalaGStanator - 06-21-2019, 08:07 AM
RE: The New 3D Printing Thread - by Nigels - 06-22-2019, 12:54 AM
RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 05:20 PM
RE: The New 3D Printing Thread - by Super - 07-28-2019, 07:10 PM
RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 09:50 PM
RE: The New 3D Printing Thread - by Super - 07-29-2019, 11:55 AM
RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 01:05 PM
RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 11:14 PM
RE: The New 3D Printing Thread - by Super - 07-30-2019, 07:39 AM
RE: The New 3D Printing Thread - by Nigels - 07-30-2019, 09:12 AM
RE: The New 3D Printing Thread - by Nigels - 08-07-2019, 09:08 PM
RE: The New 3D Printing Thread - by Super - 08-07-2019, 10:33 PM
RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 12:22 AM
RE: The New 3D Printing Thread - by Super - 08-08-2019, 01:59 AM
RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 10:38 PM
RE: The New 3D Printing Thread - by Super - 08-09-2019, 03:46 AM
RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 03:15 PM
RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 07:12 PM
RE: The New 3D Printing Thread - by Super - 08-11-2019, 11:59 AM
RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 08:12 PM
RE: The New 3D Printing Thread - by AdamdBoyd - 11-21-2020, 09:46 PM
RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 09:21 PM
RE: The New 3D Printing Thread - by Super - 08-12-2019, 11:45 AM
RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:45 PM
RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:56 PM
RE: The New 3D Printing Thread - by Nigels - 08-15-2019, 09:01 PM
RE: The New 3D Printing Thread - by ripley802 - 08-15-2019, 11:19 PM
RE: The New 3D Printing Thread - by Super - 08-16-2019, 03:22 AM
RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:07 PM
RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:10 PM
RE: The New 3D Printing Thread - by Super - 09-17-2019, 02:44 AM
RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 06:39 PM
RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 09:53 PM
RE: The New 3D Printing Thread - by Super - 09-18-2019, 09:19 AM
RE: The New 3D Printing Thread - by Nigels - 09-18-2019, 08:14 PM
RE: The New 3D Printing Thread - by Super - 09-19-2019, 03:31 PM
RE: The New 3D Printing Thread - by Nigels - 09-19-2019, 10:20 PM
RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 06:21 PM
RE: The New 3D Printing Thread - by Super - 09-20-2019, 07:21 PM
RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 08:45 PM
RE: The New 3D Printing Thread - by Super - 09-20-2019, 09:13 PM
RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 09:37 PM
RE: The New 3D Printing Thread - by Nigels - 09-25-2019, 08:14 PM
RE: The New 3D Printing Thread - by Super - 09-26-2019, 09:31 AM
RE: The New 3D Printing Thread - by Nigels - 09-26-2019, 09:03 PM
RE: The New 3D Printing Thread - by Super - 09-27-2019, 02:07 AM
RE: The New 3D Printing Thread - by Nigels - 10-04-2019, 09:59 PM
RE: The New 3D Printing Thread - by Super - 10-05-2019, 12:25 AM
RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 01:32 AM
RE: The New 3D Printing Thread - by Super - 10-05-2019, 04:52 AM
RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 09:38 PM
RE: The New 3D Printing Thread - by Super - 10-05-2019, 11:30 PM
RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 12:35 AM
RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:53 PM
RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 07:57 PM
RE: The New 3D Printing Thread - by Super - 10-07-2019, 12:40 AM
RE: The New 3D Printing Thread - by Nigels - 10-07-2019, 08:42 PM
RE: The New 3D Printing Thread - by Super - 10-07-2019, 09:22 PM
RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:55 PM
RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 10:03 PM
RE: The New 3D Printing Thread - by Super - 10-09-2019, 12:14 AM
RE: The New 3D Printing Thread - by Nigels - 10-15-2019, 10:55 PM
RE: The New 3D Printing Thread - by Super - 10-16-2019, 12:08 AM
RE: The New 3D Printing Thread - by Nigels - 10-16-2019, 12:23 AM
RE: The New 3D Printing Thread - by Super - 10-16-2019, 02:35 AM
RE: The New 3D Printing Thread - by Nigels - 10-18-2019, 10:43 PM
RE: The New 3D Printing Thread - by Super - 10-19-2019, 08:37 AM
RE: The New 3D Printing Thread - by Nigels - 10-19-2019, 05:42 PM
RE: The New 3D Printing Thread - by drew5195 - 10-21-2019, 06:58 AM
RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:11 PM
RE: The New 3D Printing Thread - by chrisjo - 10-22-2019, 05:11 PM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:44 PM
RE: The New 3D Printing Thread - by Super - 10-21-2019, 08:14 AM
RE: The New 3D Printing Thread - by drew5195 - 10-22-2019, 04:32 AM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:42 PM
RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:28 PM
RE: The New 3D Printing Thread - by Super - 10-21-2019, 09:10 PM
RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 11:14 PM
RE: The New 3D Printing Thread - by Super - 10-22-2019, 05:38 PM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:45 PM
RE: The New 3D Printing Thread - by Super - 10-23-2019, 07:35 PM
RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 07:43 PM
RE: The New 3D Printing Thread - by Nigels - 10-29-2019, 09:04 PM
RE: The New 3D Printing Thread - by Super - 10-29-2019, 09:24 PM
RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 12:52 AM
RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 06:11 PM
RE: The New 3D Printing Thread - by Super - 10-30-2019, 01:34 PM
RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 09:23 PM
RE: The New 3D Printing Thread - by Super - 10-30-2019, 09:31 PM
RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 10:11 PM
RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 09:54 PM
RE: The New 3D Printing Thread - by Super - 10-30-2019, 10:36 PM
RE: The New 3D Printing Thread - by Nigels - 10-31-2019, 09:36 PM
RE: The New 3D Printing Thread - by Nigels - 05-11-2020, 06:12 AM
RE: The New 3D Printing Thread - by Nigels - 05-13-2020, 07:49 PM
RE: The New 3D Printing Thread - by Nigels - 06-03-2020, 11:23 PM
RE: The New 3D Printing Thread - by Super - 06-04-2020, 10:38 AM
RE: The New 3D Printing Thread - by Nigels - 06-04-2020, 09:41 PM
RE: The New 3D Printing Thread - by Super - 06-26-2022, 12:06 PM
RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 04:52 PM
RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 11:12 PM
RE: The New 3D Printing Thread - by Nigels - 07-08-2022, 05:14 PM
RE: The New 3D Printing Thread - by Super - 07-08-2022, 09:38 AM
RE: The New 3D Printing Thread - by Super - 07-10-2022, 11:14 AM
RE: The New 3D Printing Thread - by Nigels - 07-10-2022, 09:22 PM
RE: The New 3D Printing Thread - by Nigels - 07-11-2022, 10:17 PM
RE: The New 3D Printing Thread - by DalaGStanator - 07-11-2022, 07:32 PM
RE: The New 3D Printing Thread - by Super - 07-12-2022, 10:40 AM
RE: The New 3D Printing Thread - by Nigels - 07-12-2022, 08:01 PM
RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:09 PM
RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:13 PM
RE: The New 3D Printing Thread - by chrisjo - 07-14-2022, 06:25 AM
RE: The New 3D Printing Thread - by Nigels - 07-14-2022, 09:33 PM
RE: The New 3D Printing Thread - by Nigels - 07-16-2022, 03:34 PM
RE: The New 3D Printing Thread - by Super - 07-15-2022, 10:12 AM
RE: The New 3D Printing Thread - by ERTLSixteen - 11-20-2022, 07:14 AM
RE: The New 3D Printing Thread - by juhs - 12-20-2022, 06:10 AM
RE: The New 3D Printing Thread - by mitzalplik - 12-23-2022, 07:22 PM
RE: The New 3D Printing Thread - by Super - 12-20-2022, 08:32 AM
RE: The New 3D Printing Thread - by chrisjo - 12-28-2022, 09:36 PM
RE: The New 3D Printing Thread - by Super - 12-29-2022, 06:24 AM
RE: The New 3D Printing Thread - by Nigels - 12-29-2022, 09:31 PM
RE: The New 3D Printing Thread - by Super - 12-29-2022, 10:00 PM
RE: The New 3D Printing Thread - by chrisjo - 12-29-2022, 10:21 PM
RE: The New 3D Printing Thread - by Super - 12-30-2022, 08:32 AM
RE: The New 3D Printing Thread - by chrisjo - 12-30-2022, 04:37 PM
RE: The New 3D Printing Thread - by Nigels - 12-30-2022, 09:04 PM
RE: The New 3D Printing Thread - by Nigels - 12-31-2022, 05:31 PM
RE: The New 3D Printing Thread - by Nigels - 01-05-2023, 10:41 PM
RE: The New 3D Printing Thread - by Super - 01-06-2023, 09:00 AM
RE: The New 3D Printing Thread - by chrisjo - 01-06-2023, 05:20 PM
RE: The New 3D Printing Thread - by Nigels - 01-06-2023, 09:22 PM
RE: The New 3D Printing Thread - by Nigels - 01-10-2023, 10:30 PM
RE: The New 3D Printing Thread - by plarnold - 01-14-2023, 05:09 AM
RE: The New 3D Printing Thread - by chrisjo - 01-14-2023, 10:04 AM
RE: The New 3D Printing Thread - by Ron Thunderr - 01-13-2023, 12:15 PM
RE: The New 3D Printing Thread - by Super - 01-13-2023, 03:24 PM
RE: The New 3D Printing Thread - by chrisjo - 01-18-2023, 06:04 PM
RE: The New 3D Printing Thread - by Nigels - 01-18-2023, 09:50 PM
RE: The New 3D Printing Thread - by chrisjo - 01-20-2023, 04:18 PM
RE: The New 3D Printing Thread - by Nigels - 01-20-2023, 10:19 PM
RE: The New 3D Printing Thread - by Super - 01-21-2023, 09:36 AM
RE: The New 3D Printing Thread - by chrisjo - 01-21-2023, 11:22 AM
RE: The New 3D Printing Thread - by Super - 01-21-2023, 11:30 AM
RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:38 PM
RE: The New 3D Printing Thread - by drew5195 - 01-21-2023, 09:03 PM
RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:46 PM
RE: The New 3D Printing Thread - by Super - 01-22-2023, 12:53 AM
RE: The New 3D Printing Thread - by Nigels - 01-22-2023, 06:43 PM
RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 11:40 AM
RE: The New 3D Printing Thread - by Nigels - 01-23-2023, 08:32 PM
RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 09:04 PM
RE: The New 3D Printing Thread - by Nigels - 01-25-2023, 09:06 PM
RE: The New 3D Printing Thread - by Super - 01-23-2023, 10:33 PM
RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 10:46 PM
RE: The New 3D Printing Thread - by Super - 01-25-2023, 07:44 AM
RE: The New 3D Printing Thread - by chrisjo - 01-25-2023, 09:47 AM
RE: The New 3D Printing Thread - by juhs - 02-08-2023, 05:36 AM
RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 07:53 AM
RE: The New 3D Printing Thread - by Super - 02-08-2023, 10:15 AM
RE: The New 3D Printing Thread - by Ron Thunderr - 02-08-2023, 01:41 PM
RE: The New 3D Printing Thread - by Super - 02-08-2023, 05:40 PM
RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 06:58 PM
RE: The New 3D Printing Thread - by chrisjo - 03-11-2023, 02:14 PM
RE: The New 3D Printing Thread - by Nigels - 03-12-2023, 01:08 AM
RE: The New 3D Printing Thread - by Super - 03-12-2023, 05:25 AM
RE: The New 3D Printing Thread - by Nigels - 03-13-2023, 12:37 AM
RE: The New 3D Printing Thread - by Nigels - 03-26-2023, 10:07 PM
RE: The New 3D Printing Thread - by Super - 03-26-2023, 11:22 PM
RE: The New 3D Printing Thread - by Super - 03-27-2023, 01:39 AM
RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 10:47 AM
RE: The New 3D Printing Thread - by jbdolan - 04-05-2023, 09:32 PM
RE: The New 3D Printing Thread - by Nigels - 04-06-2023, 09:08 PM
RE: The New 3D Printing Thread - by chrisjo - 03-27-2023, 01:38 PM
RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 09:11 PM
RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 07:25 PM
RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 09:50 PM
RE: The New 3D Printing Thread - by chrisjo - 04-05-2023, 08:11 AM
RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:39 AM
RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:13 PM
RE: The New 3D Printing Thread - by jbdolan - 04-07-2023, 05:47 AM
RE: The New 3D Printing Thread - by Super - 04-07-2023, 09:07 AM
RE: The New 3D Printing Thread - by chrisjo - 04-08-2023, 07:40 AM
RE: The New 3D Printing Thread - by Nigels - 04-08-2023, 10:15 PM
RE: The New 3D Printing Thread - by jbdolan - 04-08-2023, 06:46 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 05:26 PM
RE: The New 3D Printing Thread - by Super - 04-09-2023, 10:14 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 10:54 PM
RE: The New 3D Printing Thread - by Nigels - 04-10-2023, 07:57 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-11-2023, 02:06 PM
RE: The New 3D Printing Thread - by Nigels - 04-11-2023, 08:01 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 04-12-2023, 01:35 PM
RE: The New 3D Printing Thread - by Nigels - 04-12-2023, 09:15 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 05-13-2023, 03:59 AM
RE: The New 3D Printing Thread - by Super - 05-13-2023, 04:06 AM
RE: The New 3D Printing Thread - by Nigels - 05-13-2023, 03:35 PM
RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 04:54 AM
RE: The New 3D Printing Thread - by Nigels - 05-31-2023, 07:33 PM
RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 08:51 PM
RE: The New 3D Printing Thread - by Densha - 06-27-2023, 01:20 AM
RE: The New 3D Printing Thread - by Super - 05-31-2023, 11:42 AM
RE: The New 3D Printing Thread - by Super - 05-31-2023, 08:10 PM
RE: The New 3D Printing Thread - by drew5195 - 07-10-2023, 12:54 AM
RE: The New 3D Printing Thread - by Super - 07-10-2023, 04:42 AM
RE: The New 3D Printing Thread - by Nigels - 07-27-2023, 07:35 PM
RE: The New 3D Printing Thread - by Super - 07-28-2023, 12:13 AM
RE: The New 3D Printing Thread - by chrisjo - 07-28-2023, 08:36 AM
RE: The New 3D Printing Thread - by Super - 07-28-2023, 08:52 AM
RE: The New 3D Printing Thread - by drew5195 - 07-28-2023, 10:56 AM
RE: The New 3D Printing Thread - by Nigels - 08-05-2023, 03:57 PM
RE: The New 3D Printing Thread - by Densha - 08-13-2023, 08:01 AM
RE: The New 3D Printing Thread - by chrisjo - 08-16-2023, 12:05 PM
RE: The New 3D Printing Thread - by Super - 08-17-2023, 02:03 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 06:58 PM
RE: The New 3D Printing Thread - by Super - 11-13-2023, 07:38 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 07:48 PM
RE: The New 3D Printing Thread - by Nigels - 11-13-2023, 08:59 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 11-14-2023, 07:27 AM
RE: The New 3D Printing Thread - by Nigels - 01-19-2024, 07:50 PM
RE: The New 3D Printing Thread - by Super - 01-27-2024, 11:09 PM
RE: The New 3D Printing Thread - by Nigels - 02-19-2024, 12:16 AM
RE: The New 3D Printing Thread - by Nigels - 03-14-2024, 11:47 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 03-17-2024, 01:04 PM
RE: The New 3D Printing Thread - by Nigels - 03-18-2024, 09:06 PM
RE: The New 3D Printing Thread - by Ron Thunderr - 03-20-2024, 05:11 PM
RE: The New 3D Printing Thread - by Nigels - 03-20-2024, 11:01 PM
RE: The New 3D Printing Thread - by Nigels - 03-15-2024, 02:16 PM
RE: The New 3D Printing Thread - by Super - 03-31-2024, 11:59 AM
RE: The New 3D Printing Thread - by Nigels - 03-31-2024, 07:47 PM



Users browsing this thread: 14 Guest(s)