The New 3D Printing Thread

386 Replies, 270667 Views

Nigels

03-19-2019, 12:24 AM

Posting Freak

#60

Super the first two definitely will use any generic filament, although you might have to buy smaller reels for the Monoprice as it doesn't look like it takes kilo reels. Only the 'ToyBox' one may have dedicated spools, but even then it looks like you could at worst re-wind a normal filament spool onto the smaller one it uses...

The only brands I know of that have chipped or dedicated spools in their range are the XYZ cheaper models and the Dremel machines. Although I would guess there are others I've not heard of.

Happily collecting things all my life... Big Grin

Big Grin

The following 1 user Likes Nigels's post:
• Super

Like
Reply

Messages In This Thread

The New 3D Printing Thread - by Nigels - 01-18-2019, 11:20 PM

RE: The New 3D Printing Thread - by Super - 01-19-2019, 01:35 AM

RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 07:11 AM

RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 08:23 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-19-2019, 08:08 PM

RE: The New 3D Printing Thread - by Super - 01-19-2019, 08:40 PM

RE: The New 3D Printing Thread - by Nigels - 01-19-2019, 09:57 PM

RE: The New 3D Printing Thread - by Nigels - 01-22-2019, 10:51 PM

RE: The New 3D Printing Thread - by Super - 01-23-2019, 12:56 AM

RE: The New 3D Printing Thread - by Nigels - 01-23-2019, 07:42 AM

RE: The New 3D Printing Thread - by Super - 01-23-2019, 08:18 AM

RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 01:31 AM

RE: The New 3D Printing Thread - by Super - 01-24-2019, 07:55 AM

RE: The New 3D Printing Thread - by Nigels - 01-24-2019, 11:31 PM

RE: The New 3D Printing Thread - by Nigels - 01-29-2019, 10:26 PM

RE: The New 3D Printing Thread - by Super - 01-29-2019, 10:39 PM

RE: The New 3D Printing Thread - by Nigels - 01-30-2019, 01:27 AM

RE: The New 3D Printing Thread - by Nigels - 02-01-2019, 06:54 PM

RE: The New 3D Printing Thread - by chrisjo - 02-01-2019, 10:46 PM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 01:14 AM

RE: The New 3D Printing Thread - by Super - 02-02-2019, 07:01 AM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 10:48 AM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 02:35 PM

RE: The New 3D Printing Thread - by Super - 02-02-2019, 03:34 PM

RE: The New 3D Printing Thread - by Nigels - 02-02-2019, 04:09 PM

RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 10:15 AM

RE: The New 3D Printing Thread - by Super - 02-03-2019, 01:57 PM

RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 07:04 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-03-2019, 11:35 PM

RE: The New 3D Printing Thread - by chrisjo - 02-04-2019, 08:24 PM

RE: The New 3D Printing Thread - by Nigels - 02-03-2019, 11:57 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-04-2019, 08:53 PM

RE: The New 3D Printing Thread - by Nigels - 02-05-2019, 11:42 PM

RE: The New 3D Printing Thread - by Super - 02-06-2019, 10:30 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 02-08-2019, 02:03 AM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-08-2019, 02:21 AM

RE: The New 3D Printing Thread - by Nigels - 02-09-2019, 10:49 AM

RE: The New 3D Printing Thread - by Super - 02-09-2019, 12:30 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 02-09-2019, 08:31 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-10-2019, 01:57 AM

RE: The New 3D Printing Thread - by Nigels - 02-12-2019, 05:47 AM

RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 01:26 AM

RE: The New 3D Printing Thread - by ripley802 - 02-22-2019, 02:00 AM

RE: The New 3D Printing Thread - by Super - 02-22-2019, 07:16 AM

RE: The New 3D Printing Thread - by Nigels - 02-22-2019, 06:01 PM

RE: The New 3D Printing Thread - by Super - 02-22-2019, 11:26 PM

RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 04:29 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 02-24-2019, 06:29 PM

RE: The New 3D Printing Thread - by Off The Rails - 02-24-2019, 10:45 PM

RE: The New 3D Printing Thread - by Nigels - 02-24-2019, 11:35 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-05-2019, 12:39 AM

RE: The New 3D Printing Thread - by Nigels - 03-05-2019, 04:44 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-06-2019, 06:15 PM

RE: The New 3D Printing Thread - by Nigels - 03-17-2019, 08:44 PM

RE: The New 3D Printing Thread - by Super - 03-18-2019, 12:18 AM

RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 02:41 AM

RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:40 AM

RE: The New 3D Printing Thread - by Nigels - 03-18-2019, 08:28 PM

RE: The New 3D Printing Thread - by Super - 03-18-2019, 10:09 PM

RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 12:24 AM

RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:34 AM

RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 06:48 PM

RE: The New 3D Printing Thread - by Super - 03-19-2019, 06:55 PM

RE: The New 3D Printing Thread - by Nigels - 03-19-2019, 10:14 PM

RE: The New 3D Printing Thread - by Super - 03-19-2019, 10:29 PM

RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 12:06 AM

RE: The New 3D Printing Thread - by sunhuntin - 03-20-2019, 05:43 AM

RE: The New 3D Printing Thread - by Super - 03-20-2019, 12:22 PM

RE: The New 3D Printing Thread - by Nigels - 03-20-2019, 07:30 PM

RE: The New 3D Printing Thread - by FlyingFordFalcon - 03-26-2019, 11:49 PM

RE: The New 3D Printing Thread - by FlyingFordFalcon - 04-03-2019, 04:44 AM

RE: The New 3D Printing Thread - by Nigels - 04-03-2019, 06:06 AM

RE: The New 3D Printing Thread - by FlyingFordFalcon - 04-03-2019, 06:29 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-21-2019, 06:53 PM

RE: The New 3D Printing Thread - by Nigels - 04-21-2019, 08:16 PM

RE: The New 3D Printing Thread - by Nigels - 05-27-2019, 06:17 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-20-2019, 02:54 AM

RE: The New 3D Printing Thread - by Super - 05-28-2019, 12:07 AM

RE: The New 3D Printing Thread - by Finno - 05-28-2019, 09:24 AM

RE: The New 3D Printing Thread - by 2ARail - 06-17-2019, 03:01 PM

RE: The New 3D Printing Thread - by Nigels - 06-17-2019, 06:36 PM

RE: The New 3D Printing Thread - by Super - 06-17-2019, 06:47 PM

RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 10:35 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-20-2019, 10:55 PM

RE: The New 3D Printing Thread - by Super - 06-20-2019, 11:01 PM

RE: The New 3D Printing Thread - by Nigels - 06-20-2019, 11:59 PM

RE: The New 3D Printing Thread - by Super - 06-21-2019, 12:40 AM

RE: The New 3D Printing Thread - by Nigels - 06-21-2019, 08:31 AM

RE: The New 3D Printing Thread - by DalaGStanator - 06-21-2019, 08:07 AM

RE: The New 3D Printing Thread - by Nigels - 06-22-2019, 12:54 AM

RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 05:20 PM

RE: The New 3D Printing Thread - by Super - 07-28-2019, 07:10 PM

RE: The New 3D Printing Thread - by Nigels - 07-28-2019, 09:50 PM

RE: The New 3D Printing Thread - by Super - 07-29-2019, 11:55 AM

RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 01:05 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 07-29-2019, 10:39 PM

RE: The New 3D Printing Thread - by Nigels - 07-29-2019, 11:14 PM

RE: The New 3D Printing Thread - by Super - 07-30-2019, 07:39 AM

RE: The New 3D Printing Thread - by Nigels - 07-30-2019, 09:12 AM

RE: The New 3D Printing Thread - by Nigels - 08-07-2019, 09:08 PM

RE: The New 3D Printing Thread - by Super - 08-07-2019, 10:33 PM

RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 12:22 AM

RE: The New 3D Printing Thread - by Super - 08-08-2019, 01:59 AM

RE: The New 3D Printing Thread - by Nigels - 08-08-2019, 10:38 PM

RE: The New 3D Printing Thread - by Super - 08-09-2019, 03:46 AM

RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 03:15 PM

RE: The New 3D Printing Thread - by Nigels - 08-10-2019, 07:12 PM

RE: The New 3D Printing Thread - by Super - 08-11-2019, 11:59 AM

RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 08:12 PM

RE: The New 3D Printing Thread - by AdamdBoyd - 11-21-2020, 09:46 PM

RE: The New 3D Printing Thread - by Nigels - 08-11-2019, 09:21 PM

RE: The New 3D Printing Thread - by Super - 08-12-2019, 11:45 AM

RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:45 PM

RE: The New 3D Printing Thread - by Nigels - 08-12-2019, 08:56 PM

RE: The New 3D Printing Thread - by Nigels - 08-15-2019, 09:01 PM

RE: The New 3D Printing Thread - by ripley802 - 08-15-2019, 11:19 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 09-17-2019, 10:51 AM

RE: The New 3D Printing Thread - by Super - 08-16-2019, 03:22 AM

RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:07 PM

RE: The New 3D Printing Thread - by Nigels - 09-16-2019, 09:10 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 09-16-2019, 09:25 PM

RE: The New 3D Printing Thread - by Super - 09-17-2019, 02:44 AM

RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 06:39 PM

RE: The New 3D Printing Thread - by Nigels - 09-17-2019, 09:53 PM

RE: The New 3D Printing Thread - by Super - 09-18-2019, 09:19 AM

RE: The New 3D Printing Thread - by Nigels - 09-18-2019, 08:14 PM

RE: The New 3D Printing Thread - by Super - 09-19-2019, 03:31 PM

RE: The New 3D Printing Thread - by Nigels - 09-19-2019, 10:20 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 09-19-2019, 10:25 PM

RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 06:21 PM

RE: The New 3D Printing Thread - by Super - 09-20-2019, 07:21 PM

RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 08:45 PM

RE: The New 3D Printing Thread - by Super - 09-20-2019, 09:13 PM

RE: The New 3D Printing Thread - by Nigels - 09-20-2019, 09:37 PM

RE: The New 3D Printing Thread - by Nigels - 09-25-2019, 08:14 PM

RE: The New 3D Printing Thread - by Super - 09-26-2019, 09:31 AM

RE: The New 3D Printing Thread - by Nigels - 09-26-2019, 09:03 PM

RE: The New 3D Printing Thread - by Super - 09-27-2019, 02:07 AM

RE: The New 3D Printing Thread - by Nigels - 10-04-2019, 09:59 PM

RE: The New 3D Printing Thread - by Super - 10-05-2019, 12:25 AM

RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 01:32 AM

RE: The New 3D Printing Thread - by Super - 10-05-2019, 04:52 AM

RE: The New 3D Printing Thread - by Nigels - 10-05-2019, 09:38 PM

RE: The New 3D Printing Thread - by Super - 10-05-2019, 11:30 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 10-06-2019, 12:08 AM

RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 12:35 AM

RE: The New 3D Printing Thread - by leylandvictory2 - 10-07-2019, 11:11 PM

RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:53 PM

RE: The New 3D Printing Thread - by Nigels - 10-06-2019, 07:57 PM

RE: The New 3D Printing Thread - by Super - 10-07-2019, 12:40 AM

RE: The New 3D Printing Thread - by Nigels - 10-07-2019, 08:42 PM

RE: The New 3D Printing Thread - by Super - 10-07-2019, 09:22 PM

RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 08:55 PM

RE: The New 3D Printing Thread - by Nigels - 10-08-2019, 10:03 PM

RE: The New 3D Printing Thread - by Super - 10-09-2019, 12:14 AM

RE: The New 3D Printing Thread - by Nigels - 10-15-2019, 10:55 PM

RE: The New 3D Printing Thread - by Super - 10-16-2019, 12:08 AM

RE: The New 3D Printing Thread - by Nigels - 10-16-2019, 12:23 AM

RE: The New 3D Printing Thread - by Super - 10-16-2019, 02:35 AM

RE: The New 3D Printing Thread - by Nigels - 10-18-2019, 10:43 PM

RE: The New 3D Printing Thread - by Super - 10-19-2019, 08:37 AM

RE: The New 3D Printing Thread - by Nigels - 10-19-2019, 05:42 PM

RE: The New 3D Printing Thread - by drew5195 - 10-21-2019, 06:58 AM

RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:11 PM

RE: The New 3D Printing Thread - by chrisjo - 10-22-2019, 05:11 PM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:44 PM

RE: The New 3D Printing Thread - by Super - 10-21-2019, 08:14 AM

RE: The New 3D Printing Thread - by drew5195 - 10-22-2019, 04:32 AM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:42 PM

RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 08:28 PM

RE: The New 3D Printing Thread - by Super - 10-21-2019, 09:10 PM

RE: The New 3D Printing Thread - by Nigels - 10-21-2019, 11:14 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 10-21-2019, 10:47 PM

RE: The New 3D Printing Thread - by Super - 10-22-2019, 05:38 PM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 06:45 PM

RE: The New 3D Printing Thread - by Super - 10-23-2019, 07:35 PM

RE: The New 3D Printing Thread - by Nigels - 10-23-2019, 07:43 PM

RE: The New 3D Printing Thread - by Nigels - 10-29-2019, 09:04 PM

RE: The New 3D Printing Thread - by Super - 10-29-2019, 09:24 PM

RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 12:52 AM

RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 06:11 PM

RE: The New 3D Printing Thread - by Super - 10-30-2019, 01:34 PM

RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 09:23 PM

RE: The New 3D Printing Thread - by Super - 10-30-2019, 09:31 PM

RE: The New 3D Printing Thread - by Nigels - 10-30-2019, 10:11 PM

RE: The New 3D Printing Thread - by chrisjo - 10-30-2019, 09:54 PM

RE: The New 3D Printing Thread - by Super - 10-30-2019, 10:36 PM

RE: The New 3D Printing Thread - by Nigels - 10-31-2019, 09:36 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-14-2020, 03:38 AM

RE: The New 3D Printing Thread - by Nigels - 05-11-2020, 06:12 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 05-11-2020, 08:39 AM

RE: The New 3D Printing Thread - by Nigels - 05-13-2020, 07:49 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 05-13-2020, 08:19 PM

RE: The New 3D Printing Thread - by Nigels - 06-03-2020, 11:23 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-04-2020, 12:27 AM

RE: The New 3D Printing Thread - by Super - 06-04-2020, 10:38 AM

RE: The New 3D Printing Thread - by Nigels - 06-04-2020, 09:41 PM

RE: The New 3D Printing Thread - by leylandvictory2 - 06-04-2020, 07:50 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 11-21-2020, 10:37 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 06-26-2022, 05:09 AM

RE: The New 3D Printing Thread - by Super - 06-26-2022, 12:06 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-07-2022, 02:00 PM

RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 04:52 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-07-2022, 05:02 PM

RE: The New 3D Printing Thread - by Nigels - 07-07-2022, 11:12 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-08-2022, 01:54 AM

RE: The New 3D Printing Thread - by Nigels - 07-08-2022, 05:14 PM

RE: The New 3D Printing Thread - by Super - 07-08-2022, 09:38 AM

RE: The New 3D Printing Thread - by Super - 07-10-2022, 11:14 AM

RE: The New 3D Printing Thread - by Nigels - 07-10-2022, 09:22 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-11-2022, 02:19 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-11-2022, 06:10 PM

RE: The New 3D Printing Thread - by Nigels - 07-11-2022, 10:17 PM

RE: The New 3D Printing Thread - by DalaGStanator - 07-11-2022, 07:32 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 04:41 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 09:18 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 09:19 AM

RE: The New 3D Printing Thread - by Super - 07-12-2022, 10:40 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-12-2022, 12:35 PM

RE: The New 3D Printing Thread - by Nigels - 07-12-2022, 08:01 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-13-2022, 02:15 PM

RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:09 PM

RE: The New 3D Printing Thread - by Nigels - 07-13-2022, 05:13 PM

RE: The New 3D Printing Thread - by chrisjo - 07-14-2022, 06:25 AM

RE: The New 3D Printing Thread - by Nigels - 07-14-2022, 09:33 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-15-2022, 02:26 AM

RE: The New 3D Printing Thread - by Nigels - 07-16-2022, 03:34 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-16-2022, 05:36 PM

RE: The New 3D Printing Thread - by Super - 07-15-2022, 10:12 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 07-16-2022, 05:47 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 09-03-2022, 06:31 PM

RE: The New 3D Printing Thread - by ERTLSixteen - 11-20-2022, 07:14 AM

RE: The New 3D Printing Thread - by juhs - 12-20-2022, 06:10 AM

RE: The New 3D Printing Thread - by mitzalplik - 12-23-2022, 07:22 PM

RE: The New 3D Printing Thread - by Super - 12-20-2022, 08:32 AM

RE: The New 3D Printing Thread - by chrisjo - 12-28-2022, 09:36 PM

RE: The New 3D Printing Thread - by Super - 12-29-2022, 06:24 AM

RE: The New 3D Printing Thread - by Nigels - 12-29-2022, 09:31 PM

RE: The New 3D Printing Thread - by Super - 12-29-2022, 10:00 PM

RE: The New 3D Printing Thread - by chrisjo - 12-29-2022, 10:21 PM

RE: The New 3D Printing Thread - by Super - 12-30-2022, 08:32 AM

RE: The New 3D Printing Thread - by chrisjo - 12-30-2022, 04:37 PM

RE: The New 3D Printing Thread - by Nigels - 12-30-2022, 09:04 PM

RE: The New 3D Printing Thread - by Nigels - 12-31-2022, 05:31 PM

RE: The New 3D Printing Thread - by Nigels - 01-05-2023, 10:41 PM

RE: The New 3D Printing Thread - by Super - 01-06-2023, 09:00 AM

RE: The New 3D Printing Thread - by chrisjo - 01-06-2023, 05:20 PM

RE: The New 3D Printing Thread - by Nigels - 01-06-2023, 09:22 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-09-2023, 07:33 PM

RE: The New 3D Printing Thread - by Nigels - 01-10-2023, 10:30 PM

RE: The New 3D Printing Thread - by plarnold - 01-14-2023, 05:09 AM

RE: The New 3D Printing Thread - by chrisjo - 01-14-2023, 10:04 AM

RE: The New 3D Printing Thread - by Ron Thunderr - 01-13-2023, 12:15 PM

RE: The New 3D Printing Thread - by Super - 01-13-2023, 03:24 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-14-2023, 02:17 AM

RE: The New 3D Printing Thread - by chrisjo - 01-18-2023, 06:04 PM

RE: The New 3D Printing Thread - by Nigels - 01-18-2023, 09:50 PM

RE: The New 3D Printing Thread - by chrisjo - 01-20-2023, 04:18 PM

RE: The New 3D Printing Thread - by Nigels - 01-20-2023, 10:19 PM

RE: The New 3D Printing Thread - by Super - 01-21-2023, 09:36 AM

RE: The New 3D Printing Thread - by chrisjo - 01-21-2023, 11:22 AM

RE: The New 3D Printing Thread - by Super - 01-21-2023, 11:30 AM

RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:38 PM

RE: The New 3D Printing Thread - by drew5195 - 01-21-2023, 09:03 PM

RE: The New 3D Printing Thread - by Nigels - 01-21-2023, 11:46 PM

RE: The New 3D Printing Thread - by Super - 01-22-2023, 12:53 AM

RE: The New 3D Printing Thread - by Nigels - 01-22-2023, 06:43 PM

RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 11:40 AM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-23-2023, 11:47 AM

RE: The New 3D Printing Thread - by Nigels - 01-23-2023, 08:32 PM

RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 09:04 PM

RE: The New 3D Printing Thread - by Nigels - 01-25-2023, 09:06 PM

RE: The New 3D Printing Thread - by Super - 01-23-2023, 10:33 PM

RE: The New 3D Printing Thread - by chrisjo - 01-23-2023, 10:46 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 01-25-2023, 02:45 AM

RE: The New 3D Printing Thread - by Super - 01-25-2023, 07:44 AM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-25-2023, 08:10 AM

RE: The New 3D Printing Thread - by chrisjo - 01-25-2023, 09:47 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-29-2023, 04:19 AM

RE: The New 3D Printing Thread - by juhs - 02-08-2023, 05:36 AM

RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 07:53 AM

RE: The New 3D Printing Thread - by Super - 02-08-2023, 10:15 AM

RE: The New 3D Printing Thread - by Ron Thunderr - 02-08-2023, 01:41 PM

RE: The New 3D Printing Thread - by Super - 02-08-2023, 05:40 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 02-08-2023, 06:05 PM

RE: The New 3D Printing Thread - by Nigels - 02-08-2023, 06:58 PM

RE: The New 3D Printing Thread - by chrisjo - 03-11-2023, 02:14 PM

RE: The New 3D Printing Thread - by Nigels - 03-12-2023, 01:08 AM

RE: The New 3D Printing Thread - by Super - 03-12-2023, 05:25 AM

RE: The New 3D Printing Thread - by Nigels - 03-13-2023, 12:37 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-26-2023, 08:19 PM

RE: The New 3D Printing Thread - by Nigels - 03-26-2023, 10:07 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-27-2023, 01:29 AM

RE: The New 3D Printing Thread - by Super - 03-26-2023, 11:22 PM

RE: The New 3D Printing Thread - by Super - 03-27-2023, 01:39 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-27-2023, 10:57 PM

RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 10:47 AM

RE: The New 3D Printing Thread - by jbdolan - 04-05-2023, 09:32 PM

RE: The New 3D Printing Thread - by Nigels - 04-06-2023, 09:08 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-06-2023, 10:04 PM

RE: The New 3D Printing Thread - by chrisjo - 03-27-2023, 01:38 PM

RE: The New 3D Printing Thread - by Nigels - 03-27-2023, 09:11 PM

RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 07:25 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-29-2023, 01:48 AM

RE: The New 3D Printing Thread - by Therealblack64YT - 03-28-2023, 08:14 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 03-29-2023, 01:50 AM

RE: The New 3D Printing Thread - by Nigels - 03-28-2023, 09:50 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-05-2023, 03:09 AM

RE: The New 3D Printing Thread - by chrisjo - 04-05-2023, 08:11 AM

RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:39 AM

RE: The New 3D Printing Thread - by Super - 04-05-2023, 10:13 PM

RE: The New 3D Printing Thread - by jbdolan - 04-07-2023, 05:47 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-07-2023, 08:37 PM

RE: The New 3D Printing Thread - by Super - 04-07-2023, 09:07 AM

RE: The New 3D Printing Thread - by chrisjo - 04-08-2023, 07:40 AM

RE: The New 3D Printing Thread - by Nigels - 04-08-2023, 10:15 PM

RE: The New 3D Printing Thread - by jbdolan - 04-08-2023, 06:46 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-08-2023, 11:32 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 05:26 PM

RE: The New 3D Printing Thread - by Super - 04-09-2023, 10:14 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-09-2023, 10:54 PM

RE: The New 3D Printing Thread - by Nigels - 04-10-2023, 07:57 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-11-2023, 02:06 PM

RE: The New 3D Printing Thread - by Nigels - 04-11-2023, 08:01 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 04-12-2023, 01:35 PM

RE: The New 3D Printing Thread - by Nigels - 04-12-2023, 09:15 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 04-13-2023, 01:17 AM

RE: The New 3D Printing Thread - by Ron Thunderr - 05-13-2023, 03:59 AM

RE: The New 3D Printing Thread - by Super - 05-13-2023, 04:06 AM

RE: The New 3D Printing Thread - by Nigels - 05-13-2023, 03:35 PM

RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 04:54 AM

RE: The New 3D Printing Thread - by Nigels - 05-31-2023, 07:33 PM

RE: The New 3D Printing Thread - by ricrabi0 - 05-31-2023, 08:51 PM

RE: The New 3D Printing Thread - by Densha - 06-27-2023, 01:20 AM

RE: The New 3D Printing Thread - by Super - 05-31-2023, 11:42 AM

RE: The New 3D Printing Thread - by Super - 05-31-2023, 08:10 PM

RE: The New 3D Printing Thread - by drew5195 - 07-10-2023, 12:54 AM

RE: The New 3D Printing Thread - by Super - 07-10-2023, 04:42 AM

RE: The New 3D Printing Thread - by Nigels - 07-27-2023, 07:35 PM

RE: The New 3D Printing Thread - by Super - 07-28-2023, 12:13 AM

RE: The New 3D Printing Thread - by chrisjo - 07-28-2023, 08:36 AM

RE: The New 3D Printing Thread - by Super - 07-28-2023, 08:52 AM

RE: The New 3D Printing Thread - by drew5195 - 07-28-2023, 10:56 AM

RE: The New 3D Printing Thread - by Nigels - 08-05-2023, 03:57 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 08-12-2023, 04:05 PM

RE: The New 3D Printing Thread - by Densha - 08-13-2023, 08:01 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 08-13-2023, 09:47 PM

RE: The New 3D Printing Thread - by chrisjo - 08-16-2023, 12:05 PM

RE: The New 3D Printing Thread - by Super - 08-17-2023, 02:03 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 06:58 PM

RE: The New 3D Printing Thread - by Super - 11-13-2023, 07:38 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 11-13-2023, 07:48 PM

RE: The New 3D Printing Thread - by Nigels - 11-13-2023, 08:59 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 11-14-2023, 07:27 AM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 11-14-2023, 06:09 AM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-19-2024, 01:01 PM

RE: The New 3D Printing Thread - by Nigels - 01-19-2024, 07:50 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-20-2024, 06:13 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 01-26-2024, 06:23 PM

RE: The New 3D Printing Thread - by Super - 01-27-2024, 11:09 PM

RE: The New 3D Printing Thread - by Trainboy90 Productions - 01-28-2024, 05:08 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 02-17-2024, 07:19 PM

RE: The New 3D Printing Thread - by Nigels - 02-19-2024, 12:16 AM

RE: The New 3D Printing Thread - by Nigels - 03-14-2024, 11:47 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 03-17-2024, 01:04 PM

RE: The New 3D Printing Thread - by Nigels - 03-18-2024, 09:06 PM

RE: The New 3D Printing Thread - by Ron Thunderr - 03-20-2024, 05:11 PM

RE: The New 3D Printing Thread - by Nigels - 03-20-2024, 11:01 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 03-15-2024, 06:08 AM

RE: The New 3D Printing Thread - by Nigels - 03-15-2024, 02:16 PM

RE: The New 3D Printing Thread - by Donald9Douglas10Oliver11mp - 03-30-2024, 08:35 PM

RE: The New 3D Printing Thread - by Super - 03-31-2024, 11:59 AM

RE: The New 3D Printing Thread - by Nigels - 03-31-2024, 07:47 PM

RE: The New 3D Printing Thread - by FfarquharDeveloper - 07-30-2024, 09:01 AM

RE: The New 3D Printing Thread - by NMsTrains - 11-08-2024, 12:58 PM

RE: The New 3D Printing Thread - by Super - 11-08-2024, 03:00 PM

RE: The New 3D Printing Thread - by Densha - 11-09-2024, 10:40 AM

RE: The New 3D Printing Thread - by DrMopp1966 - 11-10-2024, 01:06 PM

RE: The New 3D Printing Thread - by chrisjo - 11-11-2024, 11:25 PM

RE: The New 3D Printing Thread - by DrMopp1966 - 11-11-2024, 11:29 PM

RE: The New 3D Printing Thread - by Nigels - 11-13-2024, 12:25 PM

RE: The New 3D Printing Thread - by Nigels - 11-11-2024, 07:00 PM

RE: The New 3D Printing Thread - by DrMopp1966 - 11-11-2024, 07:23 PM

RE: The New 3D Printing Thread - by Destination Realization - 11-12-2024, 12:10 AM

View a Printable Version

Users browsing this thread: 18 Guest(s)