(01-05-2016, 02:56 AM)Super Wrote: Very nice. I really like those windows with the matte finish as it will smooth out the interior lighting so its not so harsh and it diffuses seeing inside when daytime running. Where did you get the clear plastic from and did you apply the tape on the inside or facing to the outside of the clear plastic? It looks to be 3volts as it looks like you wired the 2 battery packs in Series. Is there an on/off switch wired in and do you have problems with the bare wire shorting out with themselves or touching the metal axle? Sorry for so many questions
Thanks Super. No problem. So basically I took just some clear plastic, actually from a package that something came in. I suppose you could buy a sheet but I was scrounging. I cut it into about 3/4" strip and the applied a long piece of the tape. It covered the plastic and then hung off on all sides. This allowed me to stick it firmly to the inside of the coach. This worked out very well.
Yes the Led's are in series and are 3v total. This goes to a switch mounted on the bottom of the coach. The led's as o mentioned are a bit strange and finicky. The bare wire actaully has a coating on it. To get them to work I had to scrape a bit off then soldier them. So far once I got them working no issues so far.