(12-09-2015, 04:25 AM)Super Wrote: I will have to do some measurements for you Ripley
Thanks super.. This is probably the best thread so far I have found on replacing them. I had glued a few from time to time but would rather try this method out as it is a little more "factory."
For the measurements it seems there are the 3 that count.
- inside hole/arbor diameter. Seems like this needs to be 2.5mm, but would 2mm fit just not snug? Maybe? Or would it cracked the gear?
- outside diameter. Which seems to need to be 7mm.
- thickness. This is the one I have the most questions on. The gears seem to be different thicknesses depending on the year/style. The ones I need seem to be smaller than the ones I have. Which may be the 5mm as listed in the auction.
I do not have a set of calipers to measure everything or I would. I suppose I could get some or get a mm/cm ruler...
Let me know what you can find though. Thanks