Flip Face Toby parts - Printable Version +- Blue Plastic Tracks (https://www.blueplastictracks.org) +-- Forum: Blue Plastic Tracks (https://www.blueplastictracks.org/forum-36.html) +--- Forum: Trackmaster Thomas and Friends (https://www.blueplastictracks.org/forum-5.html) +--- Thread: Flip Face Toby parts (/thread-4662.html)

Flip Face Toby parts - OwenDino Studios - 07-08-2021 Hello everyone! I just got flip face toby, and was wondering if anyone can send me images of the flippers under him (the full things) and the bottom piece from the rocks. I am missing these sadly. RE: Flip Face Toby parts - leylandvictory2 - 07-09-2021 The missing parts must be the flaps.  I wouldn't be surprise if Toby uses the same type of Flap as Flip Face James or Flip Face Thomas. RE: Flip Face Toby parts - confusedanddelayed - 07-09-2021 Yes the paddles are same for all the flip face trains (different colors depending on the model), so you could keep an eye for non working flip face engines that people are selling on the cheap, and then mine it for parts. Replacing the paddles is kind of tricky, but you really just need patience when aligning them with the spring and rod that connects to the face. Not sure what you can do if you’re missing a “rock” from the wall of the copper mine though? RE: Flip Face Toby parts - CooingSlinky11 - 07-09-2021 that's awesome! I'm pretty sure that the flaps are the same for all engines. RE: Flip Face Toby parts - OwenDino Studios - 07-10-2021 The flaps are different for Toby. They are wider than compared to Thomas. I tried to out the Thomas flaps in toby, but they didn’t fit. RE: Flip Face Toby parts - confusedanddelayed - 07-10-2021 Interesting, they seemed to be the same size. Do you have one of the james flip face versions to try out? RE: Flip Face Toby parts - OwenDino Studios - 07-11-2021 I tried it out, and it didn’t work. Toby has a wider set of flaps than any of the engines. I would need to 3d print these or something. If someone can make a 3d model that would be great RE: Flip Face Toby parts - FfarquharDeveloper - 07-11-2021 Could you just add something like tamiya putty onto thomas flaps and then cut down the excess putty so it'd work on Toby? RE: Flip Face Toby parts - OwenDino Studios - 07-11-2021 Idk if that would work. The shape is just different. I need pictures of Toby’s flaps to do that RE: Flip Face Toby parts - confusedanddelayed - 07-12-2021 There’s a copper mine set with photos of Toby’s flippers on US eBay right now if that helps?