+- Blue Plastic Tracks (https://www.blueplastictracks.org)
+-- Forum: Blue Plastic Tracks (https://www.blueplastictracks.org/forum-36.html)
+--- Forum: Trackmaster Thomas and Friends (https://www.blueplastictracks.org/forum-5.html)
+--- Thread: Older Trackmaster motor RPM (/thread-1283.html)
Pages:
1
2
Older Trackmaster motor RPM - kdeblanc - 10-01-2015
I am curious if anyone knows the RPM rating for the older Trackmaster trains(rubber wheel trains)? I ask because I put an older Trackmaster motor in a new Trackmaster Revolution Charlie and it flies. Check out the video.
RE: Older Trackmaster motor RPM - Nigels - 10-01-2015
It's probably the gearing ratio rather than the motor RPM, I could be wrong as I'm not an expert on the newer engines (note I don't say better
) but I believe they have a simpler gearing mechanism than the older ones
RE: Older Trackmaster motor RPM - Ucwepn - 10-01-2015
This video is proof that the new motors on trackmaster revolution are less powerful and probably cheaper per unit than the original motors. The speed increase shown would be from the voltage upgrade to 3v which is a mod I do to many older trackmasters and tomy trains and as mentioned above the gearing.
RE: Older Trackmaster motor RPM - kdeblanc - 10-01-2015
(10-01-2015, 10:48 PM)Ucwepn Wrote: This video is proof that the new motors on trackmaster revolution are less powerful and probably cheaper per unit than the original motors. The speed increase shown would be from the voltage upgrade to 3v which is a mod I do to many older trackmasters and tomy trains and as mentioned above the gearing.
Absolutely, the newer motors are snails compared. I put a motor from a revolution in an older Diesel train with a 3.7v lithium, and it wasn't any faster than stock. The main reason for wanting to know the approximate rpm is so I can get one that is a little less rpm
RE: Older Trackmaster motor RPM - Super - 10-02-2015
Cool video Kdeblanc
First I have heard someone swapping a motor on these Revolutions with an original, stock motor. It certainly shows what Ucwepn says above. My guess is that its the 3volts on the original motor that gives it the speed just like a Ucwepn mod. That and also maybe the fact the the Revolutions are darn near direct drive. I wonder if removing one battery, installing a wire in place of the other would bring the speed down essentially making it run on 1.5volts.
BTW: Welcome to BluePlasticTracks.
RE: Older Trackmaster motor RPM - kdeblanc - 10-02-2015
(10-02-2015, 01:39 AM)Super Wrote: Cool video Kdeblanc
First I have heard someone swapping a motor on these Revolutions with an original, stock motor. It certainly shows what Ucwepn says above. My guess is that its the 3volts on the original motor that gives it the speed just like a Ucwepn mod. That and also maybe the fact the the Revolutions are darn near direct drive. I wonder if removing one battery, installing a wire in place of the other would bring the speed down essentially making it run on 1.5volts.
BTW: Welcome to BluePlasticTracks.
I will try that out Super. I appreciate it.
RE: Older Trackmaster motor RPM - Super - 10-02-2015
Like your layout, are those custom made risers used for the spiral?
RE: Older Trackmaster motor RPM - kdeblanc - 10-02-2015
(10-02-2015, 04:11 AM)Super Wrote: Like your layout, are those custom made risers used for the spiral?
Thank you Super. I went the cheap route and made the spiral myself
RE: Older Trackmaster motor RPM - Super - 10-02-2015
I wouldn't call it the cheap route, more like the imaginative, custom and creative route. I like that, you are making it your own, one of a kind..
RE: Older Trackmaster motor RPM - Dan_In_MN - 10-03-2015
(10-02-2015, 04:11 AM)Super Wrote: Like your layout, are those custom made risers used for the spiral?
(10-02-2015, 02:13 PM)kdeblanc Wrote: Thank you Super. I went the cheap route and made the spiral myself
(10-02-2015, 02:15 PM)Super Wrote: I wouldn't call it the cheap route, more like the imaginative, custom and creative route. I like that, you are making it your own, one of a kind..
kdeblanc
I'd like to see some closer up shots of how you made the spirals. Nice layout!
Have you see the video with our homemade spirals?
https://www.youtube.com/watch?v=VR2OSkICpc8
Dan